Apex LED Dimming Codes Data Port and Module

loppnessmonsta · Mar 15, 2013

Trying to Narrow the search for every1. I am looking for the profiles and codes for LED dimming on a Full Apex. I am using the Data Port to connect to my Apex.

Information Please.

jbaeza83 · Mar 15, 2013

I havent done it myself but i would imagine that you need to set your ramp profiles in the profiles section then in your var outlets you need to reference them

jbaeza83 · Mar 15, 2013

If Time 14:00 to 15:00 then PF1

And on PF1 set it to Ramp then set your ramp time and intensities

loppnessmonsta · Mar 24, 2013

<RampUp Profile>
Ramp time: 60 minutes
Start intensity: 0
End intensity: 100

<RampDn Profile>
Ramp time: 60 minutes
Start intensity: 100
End intensity: 0

<BluLED_X_5>
Fallback Off
Set OFF
If Time 8:00 to 9:00 Then RampUp
If Time 9:00 to 20:00 Then ON
If Time 20:00 to 21:00 Then RampDn
End intensity: 0

<WhtLED_X_6>
Fallback Off
Set OFF
If Time 8:00 to 9:00 Then RampUp
If Time 9:00 to 20:00 Then ON
If Time 8:00 to 9:00 Then RampDn

jbaeza83 · Mar 24, 2013

Ramp time: 60 minutes
Start intensity: 0
End intensity: 100

Ramp time: 60 minutes
Start intensity: 100
End intensity: 0

Fallback Off
Set OFF
If Time 8:00 to 20:00 Then RampUp
If Time 20:00 to 21:00 Then RampDn
End intensity: 0

Fallback Off
Set OFF
If Time 8:00 to 20:00 Then RampUp
If Time 20:00 to 21:00 Then RampDn

I would change it to this that way if you ever decide that 100% intensity is too much you can run them lower. With the above the lights will continue to run at the max intensity on the profile even if its past the ramp time.

Sent from my iPad using Tapatalk HD

Confuse · Mar 24, 2013

Check this site for examples: http://www.kenargo.com/apexProgram/index.php

It helped me with setting my profiles...

Apex LED Dimming Codes Data Port and Module

loppnessmonsta

2

jbaeza83

Premium Member

jbaeza83

Premium Member

loppnessmonsta

2

jbaeza83

Premium Member

Confuse

Member

Latest posts