fs..Walkera CB180Z RTF 4CH heli package.

Status
Not open for further replies.
Joined
Sep 2, 2008
Messages
5,563
Likes
395
Points
38
Location
IE, CA
#1
This sale is for a Walkera CB180Z RTF heli package. The package will include The CB10Z , Transmitter, 2 carryign cases, 4 battery packs fof the heli, 1 battery pack for the transmitter, charger and multiple extra parts. The CB180Z currently has a LED canopy on it with FAA Lighting. The lighting kit helps pilot ot know orenintation of the heli while in flight.This is a great 4 ch heli for anyone looking to get into the hobby.

Package will include

CB180Z heli w/ LED Canopy
Transmitter WK-2603
Battery Wall Charger
4 - 1200mah 25c battery packs for heli
1 - 2200mah 3s battery pack for transmitter
2 - aluminum carrying cases

MANY EXTRA PARTS
The extra parts that are included are
2 - main frames
2 - Battery Frames
2 - Rudder Sevo Arms
2 - Tail Steering Sets
2 - Main Shafts
3 - Main Drive Gears
5 - Tail Drive Shaft
2 - Tail Booms
2 - Skid Landing Kits
4 - Carbon Fiber Stabilizer fin sets
2 Sets - Main Blades
7 sets - Rotor Blades
1 - Orange Anodized Main Blade Holders
1 - Orange Anodized Flybar Connector
1 - Orange Anodized Swash Plate
1 - Orange Anodized Ornamental Cap
Fuselage Complete Kit

I spent over 900.oo on this kit. Only reason im selling is due to not enough time
Manual and 8 pc screwdriver set included as well. There are extra screw kits and a few extra used blades in the case as well ..

Here are some specs on the setup

Specification:
1) Brushless Motor: WK-WST-21-003
2) Brushless Speed Controller: WK-WST-20A-1
3) All-up Weight: 278g (Battery included)
4) Tail Rotor Diameter: 121 mm
5) Main Rotor Diameter: 440 mm
6) Overall Length: 432 mm
7) Gyro: Built-in
8) Battery: 7.4V 1000mAh Li-Po
9) Receiver: RX-2437S with 3-Axis Gyro
10) Transmitter: WK-2603 with dual rate adjustment and throttle limiter
11) Rudder Servo: wk-7601 weight 6.0g / speed 0.08 sec/60(4.8V)torque 1.0kgf.cm /dimension 21.5*11.8*21.7mm Servo: wk-7.6g-6 weight 8.5g / speed 0.09sec/60(4.8V)torque 0.9kgf.cm /dimension 22.5*11.5*24mm



DUE TO NATURE OF THIS HOBBY AS IS, NO REFUNDS


SELLING FOR 460.00 obo
 
Last edited:
Status
Not open for further replies.

Latest posts

Top