Does anyone use the Jebao DC12000? Just installed one in my sump for my 90 gallon reef. I was trying to increase the flow through the sump and the DT. On full power I'm getting the same flow as the smaller pump I had in the sump.
The plumbing is as follows.
From the pump to the tank
4 ft - 1 inch tubing to the "Y" . From the "Y" there are 2 - 3/4 inch lines about 2 ft each.
This is not a big distance from pump to tank and I should be getting more flow.
From the tank to the sump
1 1/2 inch PVC with a ball valve to adjust the flow out of the DT.
When I installed the higher output Jebao, I did not have to adjust the overflow .
The plumbing is as follows.
From the pump to the tank
4 ft - 1 inch tubing to the "Y" . From the "Y" there are 2 - 3/4 inch lines about 2 ft each.
This is not a big distance from pump to tank and I should be getting more flow.
From the tank to the sump
1 1/2 inch PVC with a ball valve to adjust the flow out of the DT.
When I installed the higher output Jebao, I did not have to adjust the overflow .
