After talking to RapidLED they recommended (since it's easiest) swapping out the middle strip of LEDs in my setup to red, green, and UV to bring it closer to full spectrum. This will give me, strip by strip from the left to right side of the tank (it's just a Biocube so the strips are only about 2" apart and run front to back):
6x CW
6x RB
2x UV, Red, Green, 2x UV
6x RB
6x CW
Does that sound about right...? I can swap out the other strips later, but for now this would only cost me about $40. Thanks
6x CW
6x RB
2x UV, Red, Green, 2x UV
6x RB
6x CW
Does that sound about right...? I can swap out the other strips later, but for now this would only cost me about $40. Thanks