I'm not sure...man before switching to biopellets I was using the mj1200 but to much rattle noise...with the gfo that's why I want a new reactor to run again gfo but I don't know what model need to get
I don't know how say this....are u running from one chamber to another in your sump...my plan is run in the same chamber in my sump one feet of hose in one feet of hose out
Jose, just tee off of your return with a valve. In order to get the proper flow rate for the GFO you will need the valve anyways. It's a very low flow rate. I'm using the BRS filter housing and valve. Attached are pictures of the valve and the effluent from the reactor.
Jose, just tee off of your return with a valve. In order to get the proper flow rate for the GFO you will need the valve anyways. It's a very low flow rate. I'm using the BRS filter housing and valve. Attached are pictures of the valve and the effluent from the reactor.
