DIY Nori / Mysis feeder

theMerchant

Premium Member
Supporter
Joined
Dec 12, 2015
Messages
1,262
Likes
10
Points
38
Location
Pomona
#1
DIY I found and changed up a little. I used a threaded cap instead.

parts:

1" Slip Cap
1" Slip to NPT adapter
1" NPT Cap
PVC Glue
Fish line/ kite string
drill / drill bits

Drill Slip cap with a few holes to allow water to escape
Drill bottom cap for food to come out. I would start with smaller holes then adjust as needed
Glue Slip cap to slip adapter, do not glue npt cap
pull string thru top cap and tie

You can use this to feed your Tangs and other fish






credit goes to dietguru1
Original idea from
https://www.youtube.com/watch?v=R5Jjkov8Eeg
 
Last edited:
Top