DIY I found and changed up a little. I used a threaded cap instead.
parts:
1" Slip Cap
1" Slip to NPT adapter
1" NPT Cap
PVC Glue
Fish line/ kite string
drill / drill bits
Drill Slip cap with a few holes to allow water to escape
Drill bottom cap for food to come out. I would start with smaller holes then adjust as needed
Glue Slip cap to slip adapter, do not glue npt cap
pull string thru top cap and tie
You can use this to feed your Tangs and other fish
credit goes to dietguru1
Original idea from
https://www.youtube.com/watch?v=R5Jjkov8Eeg
parts:
1" Slip Cap
1" Slip to NPT adapter
1" NPT Cap
PVC Glue
Fish line/ kite string
drill / drill bits
Drill Slip cap with a few holes to allow water to escape
Drill bottom cap for food to come out. I would start with smaller holes then adjust as needed
Glue Slip cap to slip adapter, do not glue npt cap
pull string thru top cap and tie
You can use this to feed your Tangs and other fish
credit goes to dietguru1
Original idea from
https://www.youtube.com/watch?v=R5Jjkov8Eeg
Last edited: