User Tag List

Results 1 to 2 of 2

Thread: neptune pmup

  1. #1
    Registered Member
    Join Date
    Aug 2015
    Name
    Andy
    Location
    Chino Hills
    Posts
    312
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)

    Default neptune pmup

    hi guys, so i just got the Practical Multi-Purpose Utility Pump. plugged it in the 1-link and i cant see t in fusion.
    looked around online and it says it should come up as LINKA_4_1 and LINKB_4_2. but im not seeing anything on fusion. tried looking in the unsed tab section and not seeing anything.

    i have 2 1-link and have tried plugging it both boxes and nothing is coming up.
    any help is appreciated
    thanks

  2. Thanks isaacalves thanked for this post
  3. #2
    Registered Member
    Join Date
    Aug 2015
    Name
    Andy
    Location
    Chino Hills
    Posts
    312
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)

    Default

    nvm found out, incase anyone is having the same problem.
    Follow these steps.

    1 Disconnect the 1Link from the apex by removing the aquabus cable and power supply. Wait for 30 seconds to a minute.
    2 Disconnect both WAV pumps from the 1Link
    3 Go into apex classic dash and delete the 1Link module as well as any WAV module showing the "Module Setup Page"
    4 Connect the 1Link Aquabus cable into the 1Link and wait for a solid green status light
    5 Go into module setup page and update the 1Link module firmware, wait for this to complete successfully
    6 Plug in the power supply to the 1Link
    7 Connect 1 Wav pump to the 1Link, wait to make sure it shows up in "Module Setup Page"
    8 Update the Wav Modules firmware
    9 Plug in 2nd Wav pump to 1link. Make sure it shows up in "Module Setup Page", update Wav firmware


    Using your Apex Display to get the IP Address

    1 To find your Apex IP address you use the display module.
    2 Press the center button on your display module to access the Main Menu
    3 Go to Main Menu> System> Net Setup> IP Address
    4 There is your IP Address
    5 type the IP address in your url
    6 default user/pass is admin 1234

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •