Not sure if anyone on here is into car audio but I am trying to move this beast that I've had in my car. Due to the amount of driving I do I think it is wise for me to remove this sucker and put my spare back in. I've had it in my car for the last year and its made my commutes a bit more enjoyable.
Anyways I've got a 15" FI Q D2 Subwoofer in a custom ported birch box for sale. Birch being just as strong as MDF but much lighter so its not as heavy. Box is approximately 3cuft tuned to 28hz. And it can be wired up to 2 or 4 ohms so please match your amp up accordingly.
Dimensions of box
31.5" L x 22" W x 15.5" T
Specs of sub:
DUAL 2
Fs: 24.9 Hz
Re: 1.4 Ohms/coil
Qms: 5.72
Qes: .54
Qts: .49
Mms: 279g
Cms: 0.15mm/N
Sd: 810cm^2
Vas: 135 l
Spl: 87.7dB 1W/1m
Bl: 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sub OD: 15.625"
Cut ID: 14.125"
Mounting depth: 8.500"
Displacement: 0.19cuft
I am asking $250 picked up in Westminster, CA 92683. I am more than happy to demo it so you know it works. It just takes too much strategy to get it in and out of my trunk so I've decided to let it go.
Anyways I've got a 15" FI Q D2 Subwoofer in a custom ported birch box for sale. Birch being just as strong as MDF but much lighter so its not as heavy. Box is approximately 3cuft tuned to 28hz. And it can be wired up to 2 or 4 ohms so please match your amp up accordingly.
Dimensions of box
31.5" L x 22" W x 15.5" T
Specs of sub:
DUAL 2
Fs: 24.9 Hz
Re: 1.4 Ohms/coil
Qms: 5.72
Qes: .54
Qts: .49
Mms: 279g
Cms: 0.15mm/N
Sd: 810cm^2
Vas: 135 l
Spl: 87.7dB 1W/1m
Bl: 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sub OD: 15.625"
Cut ID: 14.125"
Mounting depth: 8.500"
Displacement: 0.19cuft
I am asking $250 picked up in Westminster, CA 92683. I am more than happy to demo it so you know it works. It just takes too much strategy to get it in and out of my trunk so I've decided to let it go.
