Apex ATO Config

Joined
Dec 13, 2010
Messages
522
Likes
8
Points
18
Location
Fontana
#1
This ATO config is driving me nuts. I have the following and it should work but it seems to always dump the entire content of my reservoir overnight. During the day it seems to be fine.

This is what I have configured for the outlet.

Fallback OFF
Set OFF
If Swx4_1 OPEN Then ON
If Swx4_2 CLOSED Then OFF
Defer 001:00 Then ON



Sent from my iPhone using Tapatalk
 
Joined
Dec 23, 2013
Messages
3,928
Likes
101
Points
48
Location
Los Angeles
#2
This ATO config is driving me nuts. I have the following and it should work but it seems to always dump the entire content of my reservoir overnight. During the day it seems to be fine.

This is what I have configured for the outlet.

Fallback OFF
Set OFF
If Swx4_1 OPEN Then ON
If Swx4_2 CLOSED Then OFF
Defer 001:00 Then ON



Sent from my iPhone using Tapatalk
Neptune has a forum for help on Tapatalk. If you don
 
Joined
Dec 13, 2010
Messages
522
Likes
8
Points
18
Location
Fontana
#4
I didn't realize I needed a "If Swx4_1 CLOSED Then OFF" My assumption was that once the float switch became "CLOSED" it would turn off the pump. What perplexes me further is the fact that the second float switch didn't turn off the pump.
 
Top