This ATO config is driving me nuts. I have the following and it should work but it seems to always dump the entire content of my reservoir overnight. During the day it seems to be fine.
This is what I have configured for the outlet.
Fallback OFF
Set OFF
If Swx4_1 OPEN Then ON
If Swx4_2 CLOSED Then OFF
Defer 001:00 Then ON
Sent from my iPhone using Tapatalk
This is what I have configured for the outlet.
Fallback OFF
Set OFF
If Swx4_1 OPEN Then ON
If Swx4_2 CLOSED Then OFF
Defer 001:00 Then ON
Sent from my iPhone using Tapatalk