Finally got around to finishing all the switches for the breakout box. So here’s the switches on the breakout box
Slot 1 Stand doors(light in stand turns on when doors open
Slot 2 Skimmer cup(skimmer shutoff and alarms me when float switch is open)
Slot 3 Upper float switch in sump(when closed it alarms and turns off water solenoid from ato barrel and turns off ro/di unit)
Slot 4 Lower float switch in sump(when close it alarms me and turns off skimmer)
Slot 5 Float switch in calcium reactor(this alarms me that there to much air in the reactor and it turns of cal reactor and co2 solenoid)
Slot 6 Leak detector (if leak is detected it alarms and turns off skimmer, turns off calcium reactor feed pump, turns off calcium reactor, and closes water solenoid to stop water from ato barrel.
I used power jack plugs so the switches are unplugable so when I need to clean the skimmer cup or move the cal reactor to change the co2 tank.