deaclauderdale's latest activity

  • deaclauderdale
  • deaclauderdale
    Well day 2 out of town and I got a call that nothing was on in the big tank. Breaker tripped apparently. I was able to walk my sister in...
  • deaclauderdale
    deaclauderdale replied to the thread My 200 Gal Delight.
    Except for where the water is in the external overflow also has the nut that when tightened seems to alter the seal. Fortunately I found...
  • deaclauderdale
    deaclauderdale replied to the thread My 200 Gal Delight.
    Leaked fixed. I had gasket on the wrong side [emoji2377] Sent from my iPhone using Tapatalk
  • deaclauderdale
    deaclauderdale replied to the thread Plumbing .
    Float is likely coming out anyway so we will see. Sent from my iPhone using Tapatalk
  • deaclauderdale
    deaclauderdale replied to the thread My 200 Gal Delight.
    will do. I’ll also be adding brackets attached to the stand to support the plumbing and overflow.
  • deaclauderdale
    If you have unions on you’re drains undo everything before your torque them down again. Make sure it all lines up tits. Those gaskets...
  • deaclauderdale
    deaclauderdale replied to the thread My 200 Gal Delight.
    Just found a post stating I may have the gasket installed wrong. Should he gasket on the inside of tank between tank and weir around the...
  • deaclauderdale
    deaclauderdale replied to the thread My 200 Gal Delight.
    Got a leak on the modular marine external overflow [emoji35] Any idea on how to get some good torque on the bulkhead? Can’t get a tool...
  • deaclauderdale
    deaclauderdale replied to the thread Plumbing .
    No you're correct there is a lot going on in there and I've wrestled with if I should change it but I always comeback to this is the way...
  • deaclauderdale
    deaclauderdale replied to the thread Plumbing .
    Great idea thanks.
  • deaclauderdale
    deaclauderdale liked Emac909's post in the thread Plumbing .
    What about get a double threaded female elbow and put hose to threaded adapters on the elbow and cut the kink out and replace it with...
  • deaclauderdale
    deaclauderdale replied to the thread Plumbing .
    Should I be using soft silicone or braided vinyl? Sent from my iPhone using Tapatalk
  • deaclauderdale
    Line is but not pliable enough and it’s kinking [emoji35] Any ideas on what I can do Is there a larger diameter line that’s as flexible...
  • deaclauderdale
    Start mixing water. (y)
Top