Hey all,
Breaking down my tank. Selling everything as a whole for now and if nobody ends up buying the complete system, I'll part it out. PM is key, I'm located in Tujunga, CA 91042 and will only do local pick up. No deliveries!
Please excuse the smudges and salt creep in the photo's - once wiped/cleaned it is a very sleek and clean system!!
42g tank, and about 12g sump, total roughly 54g system.
List of equipment and pics as well:
1. CAD Lights 42g Low Iron glass tank - Dimensions 30" Length, 18" Depth and Height. 1/2" Thick Glass - Low Iron and very clean and clear. Very well built aquarium, zero complaints.
2. CAD Lights stand 36" Tall - with sump room inside. Well ventilated and room for wires in the back. CUSTOM electronic panel room on the left side of tank I created, using the original stand parts so it matches with color and look. See pics. Stick out about 8" from stand and has work space on it you can utilize on top.
3. Bubble Magus Curve 5 skimmer - (Could maybe use a good cleaning on the pump, everything works fine)
4. Finnex Heater with controller
5. Current USA E Flux 1k gph return pump with controller
6. MP10 QDWireless - used but in great condition.
7. Odysea T5 24" light fixture with total 4 bulbs, 3 channels. 2 Channels are for 2xt5 bulb each, and 3rd channel is a moonlight very dim led for night time. Built in timer on all channels. New Bulbs, 2 coral plus, 2 blue plus. only about 3 weeks old.
8. Advanced Acrylics Sump with fuge compartment. Zero damage, works very well. 20" lenght, 12" depth, 14" height. Skimmer section, fuge setion in middle, and return section. Also have detachable sock filter if necessary. See below link for specific dimensions on each chamber.
https://advancedacrylics.com/collections/sumps/products/20x10x14-sump?variant=761707689
9. 4g ATO Reservoir custom that came with tank. Has a top cover and sits very well. Glass.
10. Tunze Osmolator nano ATO - only has float switch, not the one with eye.
Asking $700 for the complete system. Brand new, I paid $2,000 for everything so I think this is a fair asking price. Not splitting at the moment. It's priced to sell!
Let me know if you have any questions. These are quality equipment, as long as they are well kept they will last you a while. I did not cheap out on equipment.
Thanks for looking!
Breaking down my tank. Selling everything as a whole for now and if nobody ends up buying the complete system, I'll part it out. PM is key, I'm located in Tujunga, CA 91042 and will only do local pick up. No deliveries!
Please excuse the smudges and salt creep in the photo's - once wiped/cleaned it is a very sleek and clean system!!
42g tank, and about 12g sump, total roughly 54g system.
List of equipment and pics as well:
1. CAD Lights 42g Low Iron glass tank - Dimensions 30" Length, 18" Depth and Height. 1/2" Thick Glass - Low Iron and very clean and clear. Very well built aquarium, zero complaints.
2. CAD Lights stand 36" Tall - with sump room inside. Well ventilated and room for wires in the back. CUSTOM electronic panel room on the left side of tank I created, using the original stand parts so it matches with color and look. See pics. Stick out about 8" from stand and has work space on it you can utilize on top.
3. Bubble Magus Curve 5 skimmer - (Could maybe use a good cleaning on the pump, everything works fine)
4. Finnex Heater with controller
5. Current USA E Flux 1k gph return pump with controller
6. MP10 QDWireless - used but in great condition.
7. Odysea T5 24" light fixture with total 4 bulbs, 3 channels. 2 Channels are for 2xt5 bulb each, and 3rd channel is a moonlight very dim led for night time. Built in timer on all channels. New Bulbs, 2 coral plus, 2 blue plus. only about 3 weeks old.
8. Advanced Acrylics Sump with fuge compartment. Zero damage, works very well. 20" lenght, 12" depth, 14" height. Skimmer section, fuge setion in middle, and return section. Also have detachable sock filter if necessary. See below link for specific dimensions on each chamber.
https://advancedacrylics.com/collections/sumps/products/20x10x14-sump?variant=761707689
9. 4g ATO Reservoir custom that came with tank. Has a top cover and sits very well. Glass.
10. Tunze Osmolator nano ATO - only has float switch, not the one with eye.
Asking $700 for the complete system. Brand new, I paid $2,000 for everything so I think this is a fair asking price. Not splitting at the moment. It's priced to sell!
Let me know if you have any questions. These are quality equipment, as long as they are well kept they will last you a while. I did not cheap out on equipment.
Thanks for looking!
Attachments
-
2.4 MB Views: 0
-
2.2 MB Views: 0
-
3.2 MB Views: 0
-
2.7 MB Views: 0
-
2.2 MB Views: 0
Last edited: