Search results

Your title said diy so just throwing the idea out. If you were closer I'd build you one but don't have any links to it

2 heavy duty light bars mounted to back of stand with a 60" radion rail attached

The setup I used it on was a 110g with 3 manifolds and it held up well. I ran the pump at 80% and it was still strong enough for what I needed. I think the fitting I used was the 2nd part of a union

I believe it's 1 1/4. I used it on my other setup

Yes it'll work. I suggest you plug them in first and update the firmware before you do all the programming

You could use 1 of the 2 1" holes as a drain and tee off the other 1" hole into 2 return lines. Use the 1.5" as either your main drain or as the emergency wide open drain

After using the peristaltic pump for awhile, I found the manifold off the return pump was a safer way to go. The hose for the pump can weaken and break while you're not around and you'll come home to a wet floor. I used the recommended tubing. I now have a masterflex collecting dust. So if...

Yes these can mount to the back of the tank and the rail screws into it. You mount the swivel adaptors to the lights itself and they slide onto the bar. It doesn't need to go on the sides of the tank.

You can use 2 rms mounts connected to a long rail depending on length and connect as many radions as you need. Ecotech makes all these products. Gets pricey quick but it's available.

Nice price considering it's new and worth alot more glws!

I would drill 2 holes on the bottom back chamber if you're able to. 1 to set up a durso and the 2nd for the return

So the same person won the abyss pump AND the Crystal dynamics tank AND radion gen 4 xr30 pro. I think Cody rigged the drawing so it's not obvious it was rigged!

I had a horrible issue with dinos to start. I did a 3 day blackout. Turned on lights. Came back a week later. Did another 3 day black out. Turned on lights and it came back again a week after that. Did a 3rd 3 day blackout and haven't had a problem since. My guess is whatever was "feeding" the...

I know Jimmy at rl does. I get mine from him sometimes

I have a good amount free if wanna make the drive

Actually they all have a w on the right corner. If it was wireless, the w will light up when the controller is on.

Friend has a bunch in mv if you wanna pick up

I have a couple of 3/4 threads with locklines free if you wanna pick them up

What sizes? I might have them for you

There's a good chance that it's either eurobraced or rimless