Search results

  1. withoutaclue661

    Cheato

    Anyone in high desert have any to spare? Re did my fuge and need some to get it going. Thank you
  2. withoutaclue661

    Free stuff

    Gone lock it up please
  3. withoutaclue661

    Free stuff

    I do work in Sun Valley just north of burbank if that helps any
  4. withoutaclue661

    Free stuff

    I have 2x10gal and 1x15gal tanks for free. Also have a very solid stand that I used for a 20gal tank also for free. Pick up only, sorry but I'm not hauling stuff everywhere hoping you show up. I'm in need of cheato if anyone would like to trade but not necessary. PM me your number and I can text...
  5. withoutaclue661

    Software for leds

    I was thinking about doing a diy set up
  6. withoutaclue661

    Software for leds

    Does anyone know if there is software out there that I can install on a pc to control leds? I have a computer very close to my tank and I was thinking about upgrading to led.
  7. withoutaclue661

    Thinking about an upgrade

    Thanks everyone. Looks like 96Lx36Wx26H is what I'm going to go with. Still working on a layout for the closed loop. I'm going to use a reeflo dart with dual 1.5 inlets and 5 outlets. I think mounted directly under the tank I should get pretty close to 3000gph. So far I will reuse the Laguna...
  8. withoutaclue661

    Thinking about an upgrade

    So my wood tank has been up and running for about a year now and I'm thinking about an upgrade. Mostly because of a few things I don't like, one being 32" high. The other is how I set up the closed loop. So I'm thinking about 96" long, 26 or 28" high. Any suggestions on width? I'm thinking 36"...
  9. withoutaclue661

    Bean Animal- Location of Gate Valves

    I set mine up with the valve at the box. I used 1x1.5 drain with a 1" balancing drain (always has a slow trickle through it) and a 1.5 emergency overflow. I found it easier to dial in because I was able to look into the overflow while adjusting it. Been running about a year and haven't had to...
  10. withoutaclue661

    Looking to buy nano skimmer

    I have a cpr bak pak with extra pump for $40 if you're still looking
  11. withoutaclue661

    Wtb hang on back skimmer

    I have a cpr bak pak with extra pump for 40
  12. withoutaclue661

    Need to restock CUC

    Thanks everyone, looks like I'll be making the trek down to Ellis this weekend.
  13. withoutaclue661

    Need to restock CUC

    Where do you guys get your CUC's? Local or online? What are your thoughts on tiger tail cucumbers for cleaning the sand bed? Thanks
  14. withoutaclue661

    Break down/clean up

    One last bump before I eBay it
  15. withoutaclue661

    Mh bulb question

    Just led actinics. They are run with coral vue electronic ballasts. I've done a fair bit or reading and at 6 hrs a day, guys are replacing them at 10-12 months. I'm going to bump up to 5hrs and change them out at 10 months. No par meter and I didn't take any readings when I first turned them on.
  16. withoutaclue661

    Mh bulb question

    So I know the general rule is you change your bulbs every 6 months. I'm running 250w radiums @ 3.5 hours a day. Should I still replace them or since they are on so little can I get 8-12 months?
  17. withoutaclue661

    Break down/clean up

    Bumped back up, open to reasonable offers
  18. withoutaclue661

    Break down/clean up

    Refugium back up for grabs
  19. withoutaclue661

    Break down/clean up

    I can ship as well
  20. withoutaclue661

    Break down/clean up

    Hob refugium pending
Top