Search results

I have an old PC case a CoolerMaster CMStacker and need these bay covers. the dirty case I put them away in a safe place (several years ago and now can't find them) :doh: :doh: and redoing the layout of the components, . Really need 2 but 3 would be awesome. sry not...

Had several members request these adapter cables and a couple "no showed", these are for your WP-40/60 to hook up to your Apex and will reduce the +10v from the Apex to +5v for the Jebao Pump - safely. These are $19 ea/shipped and you just add your Ethernet cable from the Apex to the...

Made some up for the local club members and have several left over - for the WP-40 and 60 $23 ea/shipped (you get tracking and insurance) keep your stock controller intact just in case your Apex dies Got two on my tank with this variation of programming (not mine) Variable Speed Pump 1...

I'm wanareef on the PNWMAS The problem with that both pumps are programmed the same but only use one "V" port vs the way I have it you can program each pump differently but takes up two "V" ports

Exactly plug and play Reefomeez: the cat 5 was diy and that is easy, especially if you know someone with the crimper. I have a couple extra cat 5 made up in case someone needs one or you could order on off e-bay cut it in have and you have 2.

I am currently running two Jebao WP-40s on my 225gal and really like the pumps. No hacking, or wire cutting with the added Reef Angel (SpeedWave) adapter cable. I wanted some pumps that were controllable with my Apex to run various modes to try and simulate water movement. And with the Jebao...

Variety is the .........

If it's the white opaque ice maker hose in the reservoir, boil some water and place the hose in it till it softens up then take it out and pull it straight till it straightens out - but don't over pull on it, same thing for air line hose it'll straighten out in ho water. But if its something...

Basically the controller will be controlling your solenoid on your CO2 regulator, to turn it off or on depending on where you have it set in your program. You could also have the feed pump controlled as well, but that's not normal. So to answer your question any and all calcium reactors because...

Just ran into this post, nice work on the teeth, much more patience than I have. Of course I would use a router with a template, like this: :a32: usual spacing is 1/4" thick teeth and 1/4" space - cut and then move over 1/4" then cut the other teeth my jig good job

Have for sale new BrightWell NeoZeo 5x 200gram bags weighed out and another 3000g in a big bottle asking $30 and will ship buyer pays shipping , approx 8.8lbs

A good Read http://www.karensroseanemones.net/

Summer is coming around the corner and have a brand new never used but collecting dust 1 HP Eco-Plus Chiller with fittings to beat the heat with $750 and will ship (buyers pays for shipping) I'm lemonyx on e-Bay as well thanks for looking

Currently we have a 180gal mixed reef and will be upgrading to a 215gal - want to get rid of the frag tank and incorporate the stock into the main tank: Current stock list 6 Pseudanthias dispar (not keeping) pr Black Amphiprion ocellaris - Black Clowns Ctenochaetus hawaiiensis - Chevron...

This is with the Beckett Pond and Stone Foam The back wall is mostly foam with epoxy and sand and sitting on white egg crate. There are three "piles" of rock which have been assembled with a cross piece connecting it all together. Hard to see in the pix. You have to hollow out all the foam...

Nems are high light loving creatures and usually don't need to be feed if in good condition. With that said, nems have only one opening, what goes in comes back out the same opening. Usually nems should be feed about once a week, it takes time for food to digest and I'm not sure how long it...

Me, I like to diy and this is my recirculating bio=pellet reactor that I built. Not an original design but works great. I also have a carbon one that I made as well

You need one of mine :a26: any size/length

http://www.socalireefs.com/forums/showthread.php?40966-from-Stump-Town

We come down to soCal every now and then N & Out Burger still my fav