- Joined
- Aug 21, 2016
- Messages
- 525
- Likes
- 95
- Points
- 18
- Location
- Rancho Santa Margarita, Ca
- My Tank Build
-
I’ve got a used Avast Marine K1 Kalk Stirrer. I ordered a replacement Motor and shaft coupling. These have been installed this morning and tested. I’m selling this for $175.00 USD. Local pickup only. I’m located in Rancho Santa Margarita (92688).
Pictures and video testing below:
The unit is a couple of years old but has been in storage the past year. The motor block went out. I finally purchased a replacement from Avast Marine. I’ve installed the new one this morning…
the unit now also has a new shaft coupler I installed as well:
The full unit here is put together. I taped the lid over the motor to keep in place while I’m storing it. But in use I don’t seal this but you can if you like with just some silicone.
Testing the unit with the new motor and shaft in place:
https://youtube.com/shorts/2l8usfQbphM?feature=share
Pictures and video testing below:
The unit is a couple of years old but has been in storage the past year. The motor block went out. I finally purchased a replacement from Avast Marine. I’ve installed the new one this morning…
the unit now also has a new shaft coupler I installed as well:
The full unit here is put together. I taped the lid over the motor to keep in place while I’m storing it. But in use I don’t seal this but you can if you like with just some silicone.
Testing the unit with the new motor and shaft in place:
https://youtube.com/shorts/2l8usfQbphM?feature=share
Last edited:
