eMac909 150G mixed reef

Emac909

Well-known member
Joined
Jan 23, 2011
Messages
6,554
Likes
84
Points
48
Location
Yucaipa 92399
#1
Hi girls/guys! How’s it been? I’m getting back in with a 150 gallon 60”X24”X24”.
Here is the stand and the sump

The tank

This is going to be a slow build cause I still need to have some electrical work done and a water line ran.
 

Emac909

Well-known member
Joined
Jan 23, 2011
Messages
6,554
Likes
84
Points
48
Location
Yucaipa 92399
#11
So I’ve been working on thinks and acquiring equipment.
Here’s the tank on the stand

I made a cabinet on the back of the stand so I can hide equipment and have a controller panel
Equipment at this point in time
•Apex WiFi
•VorTech M1
•(2)VorTech MP40s
•iTech200 skimmer with dc pump upgrade
•Radion G1 as fuge light
•Korallin C1502 Calcium Reactor
•(2) 250watt Hamilton MH
Few other things but can remember at this time



Sent from my iPhone using Tapatalk Pro
 

Emac909

Well-known member
Joined
Jan 23, 2011
Messages
6,554
Likes
84
Points
48
Location
Yucaipa 92399
#15
Did a little plumbing. Added the drains and retunes inside the overflow.
I’m just waiting on my ball valves and unions from amazon so I can put add my manifold

Also using a maxspect ethereal as my fuge light

Also added magnetic door switch’s to turn on lights and let me know if someone or some husky tries to get into my sump



Sent from my iPhone using Tapatalk Pro
 

Emac909

Well-known member
Joined
Jan 23, 2011
Messages
6,554
Likes
84
Points
48
Location
Yucaipa 92399
#17
We’ll ball valves showed up today so I finished the manifold. I just need to get a few more fitting and more 3/4 pvc.

Also cleaned to skimmer and put it in the sump.

Also drilled the back wall of tank to at a close loop drain

And plumbed some of the close loop system

So far I’m pretty happy with how the system is coming along



Sent from my iPhone using Tapatalk Pro
 

Emac909

Well-known member
Joined
Jan 23, 2011
Messages
6,554
Likes
84
Points
48
Location
Yucaipa 92399
#18
Finished the rest of the plumbing today
Close loop

Manifold and return and drain

I do still need to add a ball valve to the outlet on the left.

Also I got my LED strip light and I ran the lights and wired up to the apex. So now the lights turn on when the doors open




Sent from my iPhone using Tapatalk Pro
 
Top