Need ATO system

[Ampink949]

Hey, I'm looking to allocate the last piece of equipment needed for my new set up. I have the R/O reservoir, but im in need of the actual ATO system (sensor, pump, etc..). The goal is to keep it as cost effective as possible. I have gone way past what I saved up for my new tank lol. The wife is not happy haha...

Please let me know if you have an extra one you are willing to part with or sell/trade.

Thank you!

PM and I will shoot you my cell.

 

[5.9reefer]

i have a few tunze ato from a tank tear down i did. i would do one for 50$ if that is fair? im located in ontario

 

[rickzter]

I have a tunze ato and ato tank combo.

Sent from my SM-G965U using Tapatalk

 

[drexel]

Do you have the ability to use a gravity fed system? The reservoir only has to be slightly elevated above the sump. If so, then get this valve here. It's what I use on my main system.

 

[Ampink949]

I dont unfortunately..... that would be a fantastic solution

Do you have the ability to use a gravity fed system? The reservoir only has to be slightly elevated above the sump. If so, then get this valve here. It's what I use on my main system.

 

[drexel]

I dont unfortunately..... that would be a fantastic solution

Then I would look for a used Tunze 3155. They last forever and if you need to replace the pump or sensor, it's not very expensive to replace. I replaced the sensor (which was still working) on one of mine for $35 or so.

 

[Ampink949]

Thank you for the recommendation!

Then I would look for a used Tunze 3155. They last forever and if you need to replace the pump or sensor, it's not very expensive to replace. I replaced the sensor (which was still working) on one of mine for $35 or so.