First off, these are really nice lights. I sell them by the pallet. if you want them installed for your business, contact me.
for home DIY they can be hung by jack chain or wire, it’s described in the manufactures instructions.
just did a job installing about 200 of these, there was a Jbox (from a previous “electrician” with a faulty neutral connection on a 277V MWBC) and just like that it took out 8 of my lights. I fixed the J box and replaced my fixtures, brought the broken ones home and was going to repair them for future sale. I repaired a few of them and decided that I would not be selling these to my customers. They are paying for new stuff, they get new stuff. However, these are really nice lights. I think I will keep 2 for my garage. They do a fantastic job of diffused work light. over my reloading bench will be awesome!
I did 4 of them and 2 of them worke, the LED array and fixture is fine, it’s the driver that blew up. 2 of the drivers were repairable and the other 2 were not.
DIY options
$24 on amazon will get you this driver same day 3 wires to splice and I’ll include wire connectors
https://www.amazon.com/120Volts-AC-Constant-Current-Flicker/dp/B0CH4VS7JR/ref=sr_1_6?crid=1YN0DGZ28YQGA&dib=eyJ2IjoiMSJ9.bp9nqvxVU2c7_RITeLNzOlz0eBo8xUJ7S2pTlhbZWh_aA31GLE9CeKr_oe2snPoYiiK_0TTjvFtGYhsEoZYzlDiBJ2ti1zH57gLsSDKr49_o4pfHOVX_YF2iWX_sPp562s2XS97E5lt7s-LD1a3fbgmykb6i8rVOEK84_jDTBPp688imCBfOPuLHB2e2gqSGMKEZXlAZ5K-wYex6uQrcBFebAa-kBpFRpRg8fXZLTdUI3rt367aO0wm2h1W2nU0LD9fpRxgIrjWiI3sHoOgfIt6Gxhn1e8Nw2ZaXNT7L8-Q.p5pLABiyOqUfcDOO9w_mAyVZAVubN9UAzW7kR53kOV4&dib_tag=se&keywords=42v+led+driver&qid=1757254394&sprefix=42V+LED+,aps,189&sr=8-6
if you are good with a soldering iron, I’ll include the varister and PC mounted fuse to diy. I had a 50% success rate fixing them
I’ll even include these really nice lever connectors. I’d just rather not put these things in the landfill. They are really nice.
Suspended instalation instructions:
pick up in corona
@laverda how good do these lights work?
for home DIY they can be hung by jack chain or wire, it’s described in the manufactures instructions.
just did a job installing about 200 of these, there was a Jbox (from a previous “electrician” with a faulty neutral connection on a 277V MWBC) and just like that it took out 8 of my lights. I fixed the J box and replaced my fixtures, brought the broken ones home and was going to repair them for future sale. I repaired a few of them and decided that I would not be selling these to my customers. They are paying for new stuff, they get new stuff. However, these are really nice lights. I think I will keep 2 for my garage. They do a fantastic job of diffused work light. over my reloading bench will be awesome!
I did 4 of them and 2 of them worke, the LED array and fixture is fine, it’s the driver that blew up. 2 of the drivers were repairable and the other 2 were not.
DIY options
$24 on amazon will get you this driver same day 3 wires to splice and I’ll include wire connectors
https://www.amazon.com/120Volts-AC-Constant-Current-Flicker/dp/B0CH4VS7JR/ref=sr_1_6?crid=1YN0DGZ28YQGA&dib=eyJ2IjoiMSJ9.bp9nqvxVU2c7_RITeLNzOlz0eBo8xUJ7S2pTlhbZWh_aA31GLE9CeKr_oe2snPoYiiK_0TTjvFtGYhsEoZYzlDiBJ2ti1zH57gLsSDKr49_o4pfHOVX_YF2iWX_sPp562s2XS97E5lt7s-LD1a3fbgmykb6i8rVOEK84_jDTBPp688imCBfOPuLHB2e2gqSGMKEZXlAZ5K-wYex6uQrcBFebAa-kBpFRpRg8fXZLTdUI3rt367aO0wm2h1W2nU0LD9fpRxgIrjWiI3sHoOgfIt6Gxhn1e8Nw2ZaXNT7L8-Q.p5pLABiyOqUfcDOO9w_mAyVZAVubN9UAzW7kR53kOV4&dib_tag=se&keywords=42v+led+driver&qid=1757254394&sprefix=42V+LED+,aps,189&sr=8-6
if you are good with a soldering iron, I’ll include the varister and PC mounted fuse to diy. I had a 50% success rate fixing them
I’ll even include these really nice lever connectors. I’d just rather not put these things in the landfill. They are really nice.
Suspended instalation instructions:
pick up in corona@laverda how good do these lights work?
Last edited:
