happyreefer
Member
Oh I see. Very cool!
Oh I see. Very cool!
D
Deleted member 20245
Guest
D
Deleted member 20245
Guest
I'm going to free up a huge section in the sump after the skimmer and before the return pumps. I used this area for reactors: sulfur, ozone, and carbon. What's the best use for this space?
1. Leave it empty
2. Add a refugium with macro algae to feed the fish (make sure algae won't clog return pumps)
3. Add a refugium with small rocks / bio media for copepods & other stuff to grow
4. Convert into a small frag tank to propagate mushrooms / easy-to-grow stuff
Thanks
1. Leave it empty
2. Add a refugium with macro algae to feed the fish (make sure algae won't clog return pumps)
3. Add a refugium with small rocks / bio media for copepods & other stuff to grow
4. Convert into a small frag tank to propagate mushrooms / easy-to-grow stuff
Thanks
thresher
Cheese wiz Rocks
Grow the kelp. Always thought it made for a cool prison.
D
Deleted member 20245
Guest
Cryptic zones require darkness & quiet area of the sump right? My sump is anything but that… lol
D
Deleted member 20245
Guest
Fully recharged my Ozone Air Dryer with a commercial dryer.
D
Deleted member 20245
Guest
Ozone is back online at 20% and run for around 2hrs after midnight.
Fallback OFF
Set OFF
If Time 00:05 to 02:00 Then ON
If ORP > 450 Then OFF
If Output Skimmer_10_2 = OFF Then OFF
If Output RetPump_6_1 = OFF Then OFF
If Output RetPump_10_1 = OFF Then OFF
thresher
Cheese wiz Rocks
Out of curiosity, anyone have thier ozone connection come loose and your home was sanitized due to the time it was left on? Heard its not too toxic and smells of chlorine.
D
Deleted member 20245
Guest
At 40 mg/hr for 2hrs or even 24hrs, it’s unlikely you’ll smell something unless you put your nose to it. The smell is distinctive, yes - like chlorine, hospital, or burning plastic.
In our situation, the fish room is very far away from our living quarters and well ventilated, we wouldn’t smell anything anyway. Besides, I haven’t smelled anything when I was running through a reactor > carbon reacto. This time I’ve removed both reactors and went directly to the skimmer. To have zero ozone escape, you can put activated carbon on top of the skimmer’s holes. I’m planning to 3D print something - also get rid of the skimmer smell as well. This method should last months.
D
Deleted member 20245
Guest
I’ll try this method for awhile to see and might plumb it back to the Avast Mutiny unit since I already own it. The Mutiny is supposed to be more efficient (better contact time) than the skimmer. I just hate cleaning it! lol
D
Deleted member 20245
Guest
UV and its effect on ORP - UV is attributed to ORP going up. Since UV is breaking down organic organics, it’s indirectly raising ORP from the graph below. My UV does offline between 4pm-9pm to conserve power.
D
Deleted member 20245
Guest
Got a new toy today — bought a cheap PAR meter from Amazon - $130. Basically, take whatever the result and multiply by 1.35 (35% less from Apogee).
D
Deleted member 20245
Guest
So the usual place where I place SPS, I’m clocking in at around 375 (Orphek bars) in the big tank at peak for 4 hours. However, on my frag tank, it’s 600 (Radions G6 Blue) at peak!
D
Deleted member 20245
Guest
D
Deleted member 20245
Guest
D
Deleted member 20245
Guest
Top down view - some detritus left but will get a longer hose inside the sump and blow it around. Productive weekend so far! 
D
Deleted member 20245
Guest
Matching Mini-Tridents! 
D
Deleted member 20245
Guest
Hot day today! Although I have AC in the fish room, I wanted to see how effective is the Honeywell fan cooling down the tank. It’s now set up to the Apex to kick in at 77F. It wasn’t that bad actually - got to 79F and now dropping.
ndrwater
Yea... I did a thing...
Is that ultimately connected via a breakout box?
