Gyre settings?

[toomuch420]

Trying to get a back and forth sway effect but best i can get is a 2 second spray then opposite side 2 second spray not exactly what im going for. Anyone share there programming or assistance pls

Sent from my SM-G998U using Tapatalk

 

[bluemon]

What gyre pumps do you have? Most have a setting that communicates with one another

 

[toomuch420]

What gyre pumps do you have? Most have a setting that communicates with one another

I bought used so not sure

Sent from my SM-G998U using Tapatalk

 

[toomuch420]

All I can find

Sent from my SM-G998U using Tapatalk

 

[drexel]

I'll be honest, I didn't find that gyres produce a good standing wave, but I would try pulse mode (or similar) and anti-sync. You'll have to fine tune the duration to the length of your tank/wave.

 

[bakbay]

Gyres are great for pushing laminar flow on top of the tank. I used to have two pairs of Maxpect XF330 & XF350, both Cloud Editions, blowing on top of the 8ft tank. They push a lot of water! However, I’ve swapped them for MP60s since I didn’t like cleaning them every month — they get noisy when dirty! The MP60s have been running for the last 6mos with zero cleaning and zero issues!

 

[anthonys_aqua]

WWC did a video about that, need enough time for water to travel across the tank, 2 seconds isnt enough

 

[wishntoboutside]

One the wave engine you have a lot of settings. First min and max flow of the pump when setting it up. Then when you create the schedule you can use the % again within the range you set I have 2 schedules set up one for day flow and the other for night flow. I think the foursquare flow pattern is pretty good . I use the ocean swell mode at night ans lower the percentages

 

[toomuch420]

One the wave engine you have a lot of settings. First min and max flow of the pump when setting it up. Then when you create the schedule you can use the % again within the range you set I have 2 schedules set up one for day flow and the other for night flow. I think the foursquare flow pattern is pretty good . I use the ocean swell mode at night ans lower the percentages

Assume you mean this thing ?
I was only trying with hydros app not yet tried this or apex cause didnt have the cords.
I only use it for my lights rn

Sent from my SM-G998U using Tapatalk

 

[toomuch420]

Assume you mean this thing ?
I was only trying with hydros app not yet tried this or apex rnView attachment 128416

Sent from my SM-G998U using Tapatalk

Sent from my SM-G998U using Tapatalk