VOTING THREAD - Contest #1 - Chance of Coral & LAReefSociety

best piece over all. growout contest winner


  • Total voters
    46
  • Poll closed .
Joined
Jun 30, 2007
Messages
2,074
Likes
242
Points
48
Location
Lakewood
#21
m3ace9, bustayanky, racinjason and bigpaul have the best pieces. You can tell a lot by the way they grow.

my guess-timates:

Racinjason's - looks like it has low flow in its location so it grew pretty thick.

bustayanky - possible lower light & lower flow so it encrusted greatly,

big paul - high flow and high light.

m3ace9 - high flow, medium light, might have been reaching for light?

Actually mine was in high light (about 6 inch from water surface) with medium flow. I think it was all my weekly dipping that stunted the growth for a bit.
 
Joined
Feb 15, 2009
Messages
19,546
Likes
334
Points
83
Location
bell gardens
#22
i thought, low flow = thinner acros... and high flow = thicker acros... because if they are growing in the ocean, and they get hit with a lot of high flow, thicker bone structures will keep them from breaking into pieces... just like how some deepwater acros are thin and break easy... while high light tabling acros grow crazy thick skeletal systems...
 

racinjason

New member
Joined
Jan 11, 2009
Messages
304
Likes
3
Points
0
Location
Corona CA
#23
m3ace9, bustayanky, racinjason and bigpaul have the best pieces. You can tell a lot by the way they grow.

my guess-timates:

Racinjason's - looks like it has low flow in its location so it grew pretty thick.

bustayanky - possible lower light & lower flow so it encrusted greatly,

big paul - high flow and high light.

m3ace9 - high flow, medium light, might have been reaching for light?

Mine has very high flow actually, generally speaking (there are always exceptions) corals grow thicker in high flow and thinner in low flow, the amount of flow can also dictate polyp extension, its not just a sign of the coral's health, but in many cases it is. Corals also tend to encrust more in higher flow areas as apposed to branching out, when a lot of flow is present they tend to encrust more and expand their base.
 

racinjason

New member
Joined
Jan 11, 2009
Messages
304
Likes
3
Points
0
Location
Corona CA
#24
i thought, low flow = thinner acros... and high flow = thicker acros... because if they are growing in the ocean, and they get hit with a lot of high flow, thicker bone structures will keep them from breaking into pieces... just like how some deepwater acros are thin and break easy... while high light tabling acros grow crazy thick skeletal systems...
you are correct Gumbii
 
Joined
Jul 17, 2013
Messages
3,449
Likes
27
Points
38
Location
Glendora
#25
I have mine placed in the upper part of the tank with medium/high flow I have thought about moving it but I figured I should leave well enough alone. I am really surprised it has made it this long, every sps I have purchased after this one has gone up in smoke on me.
It has been really cool watching the progress and seeing the difference in the coral based off other tanks.
Good luck everyone.
What are your params?
 

Six2seven

Premium Member
Supporter
Joined
Dec 27, 2011
Messages
8,473
Likes
24
Points
38
Location
San Pedro, CA
#26
Actually mine was in high light (about 6 inch from water surface) with medium flow. I think it was all my weekly dipping that stunted the growth for a bit.
I didn't mean low light but I guessed a little lower, at least partially right with medium flow lol

I have mine placed in the upper part of the tank with medium/high flow I have thought about moving it but I figured I should leave well enough alone. I am really surprised it has made it this long, every sps I have purchased after this one has gone up in smoke on me.
It has been really cool watching the progress and seeing the difference in the coral based off other tanks.
Good luck everyone.
guess right on this one lol

i thought, low flow = thinner acros... and high flow = thicker acros... because if they are growing in the ocean, and they get hit with a lot of high flow, thicker bone structures will keep them from breaking into pieces... just like how some deepwater acros are thin and break easy... while high light tabling acros grow crazy thick skeletal systems...
ughhhhh I hate "ocean" references lol. Our tanks are no where near what they are like in the ocean. But in my experience high flow has gotten me thinner branches.

Mine has very high flow actually, generally speaking (there are always exceptions) corals grow thicker in high flow and thinner in low flow, the amount of flow can also dictate polyp extension, its not just a sign of the coral's health, but in many cases it is. Corals also tend to encrust more in higher flow areas as apposed to branching out, when a lot of flow is present they tend to encrust more and expand their base.
Complete guess here just based on the photo that looked surrounded with corals. I agree, corals do encrust must in higher flow. but ive only seen the opposite when it comes to high flow/thin branches.





still a very good conversation which is why i completely guessed on these lol
 
Joined
Feb 15, 2009
Messages
19,546
Likes
334
Points
83
Location
bell gardens
#27
we are trying our hardest to mimic the ocean... not a river bank or lake...


so why would you hate when people make that connection...? we're basically doing the same thing... it's like saying, i hate when people compare a plant growing in the wild, than one growing in the dirt in the back yard... just because i use my water hose and hit it with chlorine doesn't mean it's a totally different process...


i know, what you're saying, but no... an animal is not going to grow different in the ocean than in our tank... it's an animal with DNA and genes... also, high flow in the ocean will lift up a 30lb rock and toss it... that's why corals grow thicker in higher flow... you can have a bunch of powerheads in your system, but the turbulence they throw might not be enough to mimic the ocean like you'd want it to... i've had a huge colony of red planet that was in low flow area... then on my frag rack next to the cheap koralia, they would grow huge, but thick... same tank, same amount of light... koralia are horrible for current... but they hit the acros really hard...
 

Zoarder

Member
2020 Philanthropist
Supporter
2020 POTM
Joined
Apr 26, 2013
Messages
10,643
Likes
49
Points
48
Location
Los Angeles
#28
we are trying our hardest to mimic the ocean... not a river bank or lake...


so why would you hate when people make that connection...? we're basically doing the same thing... it's like saying, i hate when people compare a plant growing in the wild, than one growing in the dirt in the back yard... just because i use my water hose and hit it with chlorine doesn't mean it's a totally different process...


i know, what you're saying, but no... an animal is not going to grow different in the ocean than in our tank... it's an animal with DNA and genes... also, high flow in the ocean will lift up a 30lb rock and toss it... that's why corals grow thicker in higher flow... you can have a bunch of powerheads in your system, but the turbulence they throw might not be enough to mimic the ocean like you'd want it to... i've had a huge colony of red planet that was in low flow area... then on my frag rack next to the cheap koralia, they would grow huge, but thick... same tank, same amount of light... koralia are horrible for current... but they hit the acros really hard...
Gumbii knows his ish. Very good explanation. I found it very interesting :)
 
Joined
Sep 9, 2013
Messages
4,628
Likes
32
Points
48
Location
Long Beach CA
#29
I have mine placed in the upper part of the tank with medium/high flow I have thought about moving it but I figured I should leave well enough alone. I am really surprised it has made it this long, every sps I have purchased after this one has gone up in smoke on me.
It has been really cool watching the progress and seeing the difference in the coral based off other tanks.
Good luck everyone.
the growth on your frag is really really impressive.
 

Six2seven

Premium Member
Supporter
Joined
Dec 27, 2011
Messages
8,473
Likes
24
Points
38
Location
San Pedro, CA
#31
we are trying our hardest to mimic the ocean... not a river bank or lake...


so why would you hate when people make that connection...? we're basically doing the same thing... it's like saying, i hate when people compare a plant growing in the wild, than one growing in the dirt in the back yard... just because i use my water hose and hit it with chlorine doesn't mean it's a totally different process...


i know, what you're saying, but no... an animal is not going to grow different in the ocean than in our tank... it's an animal with DNA and genes... also, high flow in the ocean will lift up a 30lb rock and toss it... that's why corals grow thicker in higher flow... you can have a bunch of powerheads in your system, but the turbulence they throw might not be enough to mimic the ocean like you'd want it to... i've had a huge colony of red planet that was in low flow area... then on my frag rack next to the cheap koralia, they would grow huge, but thick... same tank, same amount of light... koralia are horrible for current... but they hit the acros really hard...
don't be mad at me gumbi, i don't hate you lol
 

Smite

Premium Member
Supporter
2020 POTM
Joined
Jun 11, 2013
Messages
6,359
Likes
3,777
Points
83
Location
Garden Grove
#39
M3ace9 for the win. Good color, growth and polyps. That's the one that would get my cash in a store.
 

Latest posts

Top