Search results

  1. deaclauderdale

    My 200 Gal Delight

    Except for where the water is in the external overflow also has the nut that when tightened seems to alter the seal. Fortunately I found a few post and then some instructions on where to place the gasket for the modular marine overflow I have. Just glad the leak stopped although I still have...
  2. deaclauderdale

    My 200 Gal Delight

    Leaked fixed. I had gasket on the wrong side [emoji2377] Sent from my iPhone using Tapatalk
  3. deaclauderdale

    Plumbing

    Float is likely coming out anyway so we will see. Sent from my iPhone using Tapatalk
  4. deaclauderdale

    My 200 Gal Delight

    will do. I’ll also be adding brackets attached to the stand to support the plumbing and overflow.
  5. deaclauderdale

    My 200 Gal Delight

    Just found a post stating I may have the gasket installed wrong. Should he gasket on the inside of tank between tank and weir around the bulkhead and then the 2nd gasket between tank and the external overflow not in the overflow on the nut side of the bulkhead. I’ll try this tomorrow or Friday...
  6. deaclauderdale

    My 200 Gal Delight

    Got a leak on the modular marine external overflow [emoji35] Any idea on how to get some good torque on the bulkhead? Can’t get a tool in there as the space is way to tight. It’s the only place that I have a leak thus far some I’m pretty happy about that. Sent from my iPhone using Tapatalk
  7. deaclauderdale

    Plumbing

    No you're correct there is a lot going on in there and I've wrestled with if I should change it but I always comeback to this is the way I want the system plumbed. The varios handles the display, while the vectra handles the fuge, a reactor when/if needed, and can also be used in the event the...
  8. deaclauderdale

    Plumbing

    Great idea thanks.
  9. deaclauderdale

    Plumbing

    Should I be using soft silicone or braided vinyl? Sent from my iPhone using Tapatalk
  10. deaclauderdale

    Plumbing

    Line is but not pliable enough and it’s kinking [emoji35] Any ideas on what I can do Is there a larger diameter line that’s as flexible as this smaller dosing line? This is my final hurdle before water. Sent from my iPhone using Tapatalk
  11. deaclauderdale

    My 200 Gal Delight

    Forgot to add this top down shot of the scape. I plan on adding some little rubble islands to provide hiding place for shrimp and smaller fish. Sent from my iPhone using Tapatalk
  12. deaclauderdale

    My 200 Gal Delight

    I just might. Going to finish the return plumbing tomorrow and then nothing left to do but add water.
  13. deaclauderdale

    My 200 Gal Delight

    Got the scape going. 2 towers and 1 island with nice ledges. And 1 pic of how it all started. Sent from my iPhone using Tapatalk
  14. deaclauderdale

    Marcos cement

    How much you want for it?
  15. deaclauderdale

    Marcos cement

    You have the activator liquid as well? And where are you located?
  16. deaclauderdale

    Marcos cement

    Anybody got any Marcos cement? My order from BRS is delayed and I want to start gluing my rocks.
  17. deaclauderdale

    My 200 Gal Delight

    Thanks Matt. Yeah I was really torn about going glass doors at first as my office doubles as a guest room and I was concerned about light spill when the fuge light is on. Turns out it adds a bit ambiance…lol…I’ll kill the light when guest are over. Sent from my iPhone using Tapatalk
  18. deaclauderdale

    My 200 Gal Delight

    Yep that’s rock and I’m messing with the lights (again). Order some Marco’s cement from BRS so I’ll be putting together some structures shortly and maybe she’ll be wet by thanksgiving. Sent from my iPhone using Tapatalk
  19. deaclauderdale

    Smite's Stout CDA - 205G

    Any sand displacement with 6105’s running full blast? Sent from my iPhone using Tapatalk
  20. deaclauderdale

    Smite's Stout CDA - 205G

    Yeah I’m truly learning patience with this build. Was actually wondering how much space you had between your collection cup and the stand. I’m actually glad you’re waiting until after you all get back from Thanksgiving as we know that in this hobby all things go wrong when we are not around...
Top