I have a custom almost-brand-new ~125gallon LeeMar tank and stand for sale.
TANK:
70x18x24:
- Starphire Glass both long sides
- Overflow box on one short end with (3) holes through the bottom, and (1) additional hole in the front of the box near the water line for the return line
- standard black trim
STAND:
72x20x30"
- LeeMar's fanciest model "Atlantis"
- made from Maple wood
- matching doors along both long sides
- currently has a "natural" finish, meaning only a clear coat over the maple wood
This tank and stand are about 9 months old. The tank has had water in it for less than 4 months though and only has (1) small scratch on the entire tank, as far as I can tell.
The tank cost me over $850 at wholesale, and the stand cost me over $750 at wholesale.
I am asking $750 for BOTH tank and stand.
Both tank and stand are sold USED, and AS-IS.
**DISCLAIMER: the tank has two (repaired) cracks in the bottom pane of glass. The cracks originate from one of the holes in the overflow box and dead-ends at the two nearest sides. The cracks are in such a position that they have already cracked as far as they can go, and there is no chance of the cracks continuing in any direction. I sandwiched the top and bottom of the entire area around the cracks with 1/4" sheets of acrylic and used an entire tube of commercial aquarium-grade silicone to absolutely eliminate any chance of leaks. I then leak-tested the tank with freshwater for a full month (no leaks) then filled the tank with sand, rock, and saltwater, and ran it for another full month (again no leaks). (see diagrams below of crack and repair)
(This is the actual tank, and actual stand. The canopy is NOT included)
TANK:
70x18x24:
- Starphire Glass both long sides
- Overflow box on one short end with (3) holes through the bottom, and (1) additional hole in the front of the box near the water line for the return line
- standard black trim
STAND:
72x20x30"
- LeeMar's fanciest model "Atlantis"
- made from Maple wood
- matching doors along both long sides
- currently has a "natural" finish, meaning only a clear coat over the maple wood
This tank and stand are about 9 months old. The tank has had water in it for less than 4 months though and only has (1) small scratch on the entire tank, as far as I can tell.
The tank cost me over $850 at wholesale, and the stand cost me over $750 at wholesale.
I am asking $750 for BOTH tank and stand.
Both tank and stand are sold USED, and AS-IS.
**DISCLAIMER: the tank has two (repaired) cracks in the bottom pane of glass. The cracks originate from one of the holes in the overflow box and dead-ends at the two nearest sides. The cracks are in such a position that they have already cracked as far as they can go, and there is no chance of the cracks continuing in any direction. I sandwiched the top and bottom of the entire area around the cracks with 1/4" sheets of acrylic and used an entire tube of commercial aquarium-grade silicone to absolutely eliminate any chance of leaks. I then leak-tested the tank with freshwater for a full month (no leaks) then filled the tank with sand, rock, and saltwater, and ran it for another full month (again no leaks). (see diagrams below of crack and repair)
(This is the actual tank, and actual stand. The canopy is NOT included)
