20x20x20 35gallon cube made by LeeMar regular glass basically brand new. Set it up about 4-5 months ago after it sat in my garage wrapped up and unopened from them for almost 2 years. And now it needs to go bc I've decided to take a FULL break from the hobby.
No scratches in perfect condition. 1"drain and 1/2"return drilled thru the bottom in trapezoid overflow box centered on back the wall with a lid
All plumbing included and this is a turn key system. Add fish water and coral
-Tunze combline osmolator (skimmer) internal combline bubble blaster pump. one of the Lower magnets on the unit that holds it to the glass needs to be replaced. But not needed to operate works fine I never used it. Tunze may even ship/ give it to you for free if you contact them.
-6month old Controllable LED panel from OceanRevive (arctic T247) with remote control and single knob/button control as well. Same light Reefers Garage uses. With legs and hanging kit
-stand is black in great condition. Inside painted with red guard waterproofing and painted black over. Single door some rust on the hinges 2 compact computer fans mounted inside stand as well
21.5"x21.25"x36"
-tunze 6015-A power head (looks like a jaebo)
-Ehiem 1250 return pump
-100 watt Via Aqua heater with controller and temp probe (all in one)
-about 16 gallon custom sump 3/8 acrylic 17.25"x14.25"x16.25"tall (large area is 7.25"x14.25 ) first chamber area on right where water drops in thru baffles is 6"x6.5" and final chamber on left 8"x6.5"
-clamp on Fuge light. Par 20 bulb 5k
-DJ Power strip 8 plugs with switches
- 2" sand bed (3gallon bucket) CaribSea coarse reef sand
-few select pieces of Live rock 1 large tonga piece and 3 others from Fiji
$500 firm
for everything listed.... FCFS...... No trades unless they go bang bang! PM IS KEY
No scratches in perfect condition. 1"drain and 1/2"return drilled thru the bottom in trapezoid overflow box centered on back the wall with a lid
All plumbing included and this is a turn key system. Add fish water and coral
-Tunze combline osmolator (skimmer) internal combline bubble blaster pump. one of the Lower magnets on the unit that holds it to the glass needs to be replaced. But not needed to operate works fine I never used it. Tunze may even ship/ give it to you for free if you contact them.
-6month old Controllable LED panel from OceanRevive (arctic T247) with remote control and single knob/button control as well. Same light Reefers Garage uses. With legs and hanging kit
-stand is black in great condition. Inside painted with red guard waterproofing and painted black over. Single door some rust on the hinges 2 compact computer fans mounted inside stand as well
21.5"x21.25"x36"
-tunze 6015-A power head (looks like a jaebo)
-Ehiem 1250 return pump
-100 watt Via Aqua heater with controller and temp probe (all in one)
-about 16 gallon custom sump 3/8 acrylic 17.25"x14.25"x16.25"tall (large area is 7.25"x14.25 ) first chamber area on right where water drops in thru baffles is 6"x6.5" and final chamber on left 8"x6.5"
-clamp on Fuge light. Par 20 bulb 5k
-DJ Power strip 8 plugs with switches
- 2" sand bed (3gallon bucket) CaribSea coarse reef sand
-few select pieces of Live rock 1 large tonga piece and 3 others from Fiji
$500 firm
for everything listed.... FCFS...... No trades unless they go bang bang! PM IS KEY
