I did a partial cleaning of the tank today. Wet for just over a year. External MD overflow, 3x1" drains. All plumbing is 1" schedule 80 pvc, same goes for gate/ball valves. Plumbed for a m2 vectra but there is a union so you can cut in whatever return fits 1". Return line is 1" until it hits the bulkhead. Overflow box teeth are removed, it ran too close to the top. I ran a black media that came with the Bashsea sump cut to fit, works great. Return line has a manifold with 4 outlets all with 1/2 schedule 80 true union outlets for easy maintenance.
Stand has a couple rusty hinges. It also has a false ceiling I used to mount fans for humidity but also as a chase to hide wiring from point at to point b. Access from both sides and a E-compartment or storage area off the front. There is also a controller compartment if you choose to use it on the back to the side of the sump. It wont fit much more than 3 controllers and hide a good amount of wiring.
Bashsea sump, I don't recall the model number but it's grey and white to match the stand and schedule 80. Needs to be cleaned it's a smart sump 30 I believe. Something like 30x16x16. Return is to sock holders or fuge, skimmer then media section and return.
Pad is 1/4 and adhered to the stand top, in great shape. Bottom of tank is painted white to reflect light back up, works very well.
I looked for scratches and didn't notice any before I drained it, overall very clean.
$800 OBO. You can check out my build thread that's pretty in depth here:
http://www.socalireefs.com/index.php?threads/smites-uns-75g-peninsula.101713/
It shows just about all the stand construction.
I can give tips on how to set up the overflow properly and all that, or if you're very close to me I can cruise by and help you plumb it up too but it's very straight forward IMO.
Stand has a couple rusty hinges. It also has a false ceiling I used to mount fans for humidity but also as a chase to hide wiring from point at to point b. Access from both sides and a E-compartment or storage area off the front. There is also a controller compartment if you choose to use it on the back to the side of the sump. It wont fit much more than 3 controllers and hide a good amount of wiring.
Bashsea sump, I don't recall the model number but it's grey and white to match the stand and schedule 80. Needs to be cleaned it's a smart sump 30 I believe. Something like 30x16x16. Return is to sock holders or fuge, skimmer then media section and return.
Pad is 1/4 and adhered to the stand top, in great shape. Bottom of tank is painted white to reflect light back up, works very well.
I looked for scratches and didn't notice any before I drained it, overall very clean.
$800 OBO. You can check out my build thread that's pretty in depth here:
http://www.socalireefs.com/index.php?threads/smites-uns-75g-peninsula.101713/
It shows just about all the stand construction.
I can give tips on how to set up the overflow properly and all that, or if you're very close to me I can cruise by and help you plumb it up too but it's very straight forward IMO.
