AquaJapan 40 gallon AIO low iron glass and stand

Joined
Sep 15, 2018
Messages
763
Likes
177
Points
43
Location
Irvine
#1
Time to upgrade cause I have corals outgrowing this tank, and my other AIO.

This has been one of my favorite tanks ever. Asian low iron glass, slightly more yellowish than US low iron glass (blue tint), so it’s almost like a built in lense filter.

Three large chambers in the back that housed an 8x8x4 marine pure block. The first chamber makes an awesome refugium because AJ AIOs aren’t blacked out at the back so you can see everything.

Asking only $175 for a quick sale with a basic cobalt pump.

Or for $50 more I’ll provide a DC controlled return pump.

There’s no chips or cracks, however I think there’s a couple of scratches. To be frank, I hardly notice the scratches unless I’m looking for them.

Cabinet is the original stand that came with the tank. Stand has feet so slightly elevated.

Includes heater, self leveling mat and DIY mesh top.

Currently taken down, but pics shows when it was up throughout the past year.

Less than 2 yrs old. I’ve had it for 9 mos and previous owner here I believe only had it for about 6 mos.

Also open to trades.




Sent from my iPhone using Tapatalk
 
Joined
Sep 15, 2018
Messages
763
Likes
177
Points
43
Location
Irvine
#2
Cleaned and rest to go! Gave it a light citric acid bath and CC scrape.










Sent from my iPhone using Tapatalk
 
Joined
Sep 15, 2018
Messages
763
Likes
177
Points
43
Location
Irvine
#4
What is the dimensions of the back panel?
8” first chamber
14” middle
10.5” last chamber (return).
About 4.25” width of the chambers.

Can certainly fit a lot of media, reactors, skimmers, etc. I used the first chamber with live rock and macroalgae. I used to have chaeto but it worked too well. Because the entire back panel is clear it was easy to maintain and observe. I actually found myself staring at the fuge portion a lot.

The middle section I had a big marine pure block and I eventually put an HOB skimmer but initially had a slim line skimmer.

In the last chamber, I had a beefy DC pump and plenty of space for a reactor but I actually had a submersible UV which worked well to polish the water and keep the return chamber clean.

Over tank dimensions rare:

32”x16”x20” tall
With stand at 29.5” tall


Sent from my iPhone using Tapatalk
 
Joined
Sep 15, 2018
Messages
763
Likes
177
Points
43
Location
Irvine
#7
Sorry, SOLD.

Only new ones available. Anyone interested, PM


Sent from my iPhone using Tapatalk
 

Latest posts

Top