Had a bubble magus reactor that Goober gave me. I broke it when I dropped it trying to put plumbing on and had to cut off the broken part. So I ended up converting the reactor into a cal reactor.
I cut the broken part off. Also I cut the top and bottom off. I then used a router to cut the old tube out of the lid and base plate. Then drilled the holes for the 3/4” pvc for the plumbing. Then I plumbed to pump, ph probe holder, inlets, and outlets. I made a plate for the media to rest on with the router and an access lid.
I used the white piece of pvc be cause sch80 was to thick on pipe. I need to put an insert in the pvc to create a suction action on the inlets. Sense the 80 was to thick I use sch40 pvc so I course insert an a smaller piece of pvc inside to create the suction on the inlets. I then painted the white pvc with gray paint.
I cut the broken part off. Also I cut the top and bottom off. I then used a router to cut the old tube out of the lid and base plate. Then drilled the holes for the 3/4” pvc for the plumbing. Then I plumbed to pump, ph probe holder, inlets, and outlets. I made a plate for the media to rest on with the router and an access lid.
I used the white piece of pvc be cause sch80 was to thick on pipe. I need to put an insert in the pvc to create a suction action on the inlets. Sense the 80 was to thick I use sch40 pvc so I course insert an a smaller piece of pvc inside to create the suction on the inlets. I then painted the white pvc with gray paint.