Hey guys what would you suggest in DIY fans?
I'm thinking about building one with a speed controller and using high quality brushless fans Like Cofan or Mechatronics any inputs would be appreciated thanks!
I am actually Thinking about building two units one for the main tank and the sump and see how that works. But for now ill try and build one for the sump I wanted a speed controller so I can manage the noise if it gets too loud.
Hey that sounds great I might try the temp controllers integrated I'm just
Really in the DIY mode so ill prolly use some brushless fans plus it will save me some space under the stand
I've got a clip on fan that I would trade ya. Made by sunlight supply. After going LEDs for my DT and fuge lighting and I haven't been above 80 degrees... even when its hot.
Hey that sounds great I might try the temp controllers integrated I'm just
Really in the DIY mode so ill prolly use some brushless fans plus it will save me some space under the stand
I've got a clip on fan that I would trade ya. Made by sunlight supply. After going LEDs for my DT and fuge lighting and I haven't been above 80 degrees... even when its hot.
Update I ordered some fans and some speed controllers .
Anyways while I wait
For the packages to arrive, How would you mount the fans since these are larger fans I think 2 fans should be sufficient for a 100 gal sump
So do you have a temperature controller or just plug the fan directly to the outlet? I built mine with a 16 buck temp controller from ebay. It works great, but a $24 temp controller is more flexible. My tank is not over 80F. I do have to top off every day though because the water evaporates too fast.