FS DIY LED Fixture

Status
Not open for further replies.

dwolson2

New member
Joined
Feb 11, 2011
Messages
378
Likes
1
Points
0
Location
Camarillo
#1
51 DIY Led array with drivers. 400$
4Red, 4 green, 7actinic, 14Royal Blue, 8 Blue and 14 white. Cree LEDs
Drivers are broken up: red w/3 RB, green w/3rb, 16 Blue/RB, 14 white, and 7 actinic.
All of the LEDs are on a 6X20" heatsink. The fixture was run for about 30 hours on 40% or less and maybe an hour at 100%(for showing people and pictures)
Also has 2 fans that were selected for having the most airflow while still being quiet(searched for a few hours before buying them)
There are currently no lenses on the fixture, but I have a bag full of them if the user wanted to add them.
Used all meanwell drivers except the actinics which is a rapidled fixture
I am selling because I now have a rimless tank and bought a radion for the tank. Going down a little bit in power(compared to this fixture, but it takes up a little bit less realestate.
I would recommend this light for a 40 breeder w/sps or a 4' with LPS(like a 75 or 90)
How they are laid out:

In the canopy(with quick disconnect harnesses)

All On:

Blue:

White:

Red:

Green:


Willing to have a partial trade, I am looking for an MP10WES and BM doser
 

dwolson2

New member
Joined
Feb 11, 2011
Messages
378
Likes
1
Points
0
Location
Camarillo
#2
4 Red XP-E
4 Green XP-E
7 actinic •410-420nm
14 Royal Blue XP-E
8 Blue XP-E
14 cool white XP-G
(1) LPF-60D-54 Dimmable Driver (for the blue LEDs)
(2) Mean Well ELN-60-27D Dimmable Driver (for the Red/Green LEDs)
(1) Mean Well ELN-60-48D Dimmable Driver (for the White LEDs)
(1) Rapid Led Dimmable Nano Driver (for the Actinic(UV) LEDs)
 
Status
Not open for further replies.
Top