FS EVO LED 200 for 36" long 30" deep tank $300

Joined
Nov 9, 2009
Messages
692
Likes
5
Points
18
Location
Arcadia, CA
#1
EVO LED Model: 35QWPE

This is a 200 watt unit with 200 led bulbs.
Input Current: 0.83-2A
Input Voltage: 100-240VAC
Ratio: 46:450: 14000k=30:20:50
Measurements: 24” x 8” x 2.25
Designed for a tank measuring 36 x 24 x 30
Dimmable manually; cannot be dimmed with a controller.

Includes:
4 x 12” hanging cables and clips
8' Dual Power Cords with on and off switches as well as manual dimmer knobs
Matte black powder coated housing in perfect condition
4 Ultra Quiet Cooling Fan
4- 12" Stainless Steel hanging Cables

This unit is different from the EVO 200 currently on EVO’s website; this unit does not appear to have the Red, Green, White bulbs on one line and the Blue ones on another. Instead, there appears to be Whites and Blues on separate manual dimmers. This unit is not programmable. I ran these at half power.

This fixture is better on a 36” tank as you can see from the pictures. My tank is a 90 gallon, at 48” wide. This was fine while I was still stocking my tank but now that I am pretty full I pulled out my old 48” T5s. I also preferred to angle the lights off the front glass a little.

Yea, I know I had a lot of micro bubbles in my tank when I took these pictures.

If you buy the light I can tell you how you where the part of the stand can be purchased and DIY.
I promised someone else I would not share this information freely. Please do not ask otherwise. Thanks. NR 13.jpg NR 14.jpg NR 15.jpg NR 11.jpg NR 12.jpg

More pictures can be found at my photobucket account below.
http://s887.photobucket.com/user/swimmingswammi/library/For Sale/Hardware FS/012413/EVO 200

Pick up in Arcadia, two blocks west of the Santa Anita Mall/Race Track.
 
Top