- Joined
- Dec 3, 2009
- Messages
- 463
- Likes
- 5
- Points
- 18
I have a SWC 120 skimmer for $120
I replace the pump with a better ATMAN ph1100 about 4months.
pick up at 90042*
FCFS or will hold with payment send thru paypal.
a lil' info for this protein skimmer.
Single pump Xtreme 120 conical protein skimmer.
Fully disassemble, due to the removable base plate. Perfectly balanced body and neck.
Gate valve pipe output allows you to adjust the skimmer and have precision control of the water level.
Custom needle wheel mesh wheel hybrid impeller. Up to 300lph/10scfh of air pull using custom impeller.
(Air number will vary depending on aquarium set up) These are real numbers not hyped numbers.
Draws less than 18 watts of electricity per pump.
Quick release neck on the collection cup - requires 1/2 inch of clearance to remove the cup.
In sump skimmers only.
Recommended water depth 5-8 inches.
18" in Height with a 6" X 7.25" Footprint.
Tank ratings:90
Cleaned and ready to go.
thanks for looking
I replace the pump with a better ATMAN ph1100 about 4months.
pick up at 90042*
FCFS or will hold with payment send thru paypal.
a lil' info for this protein skimmer.
Single pump Xtreme 120 conical protein skimmer.
Fully disassemble, due to the removable base plate. Perfectly balanced body and neck.
Gate valve pipe output allows you to adjust the skimmer and have precision control of the water level.
Custom needle wheel mesh wheel hybrid impeller. Up to 300lph/10scfh of air pull using custom impeller.
(Air number will vary depending on aquarium set up) These are real numbers not hyped numbers.
Draws less than 18 watts of electricity per pump.
Quick release neck on the collection cup - requires 1/2 inch of clearance to remove the cup.
In sump skimmers only.
Recommended water depth 5-8 inches.
18" in Height with a 6" X 7.25" Footprint.
Tank ratings:90
Cleaned and ready to go.
thanks for looking
