INKBIRD - ITC 308 - WIFI Controller Issues: Need Local Help

[OldReefGuy]

Anyone local know how to set-up this controller? I'm having issues:
1) Doesn't turn on cooling at desired temp (actually doesn't turn on at all). Once I reset it turns on and will turn off at correct temps. But then wont turn back on at target temp.
2) Wifi App not connecting.

I do NOT think its a controller issue. Its 100% User malfunction. Anyone local willing to help me set-up? Will trade for In-N-Out.....

 

[cvu]

I only use it for heaters right now and it's working and connecting to the app OK. Haven't tried the cooling yet - don't have chiller yet

 

[OldReefGuy]

I'm only using for cool function (For my Fans, I dont have a chiller either).

 

[Koral_Crush]

Clean your probe

 

[OldReefGuy]

Its clean...its a brand new unit

 

[Dooly]

hold the "set" button, tap set button again to run through each setting and list them here..

 

[AliRef]

Кто-то читал отзывы пищевые отходы и санитарный брак должны ответ тко в 2022 годуКто-то читал отзывы пищевые отходы содержание вредных веществ тко московскаяНасколько это безопасно пищевые отходы компост оператор тко вывоз мусора москва .
Вы никогда не сталкивались ведро для пищевых отходов ао ткоКто-то читал отзывы установка измельчителя пищевых отходов на мойку тко личныйНасколько это безопасно измельчитель пищевых отходов для раковины тко московская .

 

[OldReefGuy]

^ Thats what I was thinking also

 

[Letsgotothezoo]

Another Scammer up there

 

[OldReefGuy]

Current Setting as below:
DEFAULT SCREEN: 80.3 / 78.0
HD:3
CD:3
AH:81
AL:70
PT:0
CA:0
CF:F
TS:78

Came home and again, Temp went to 80.0 and fan didnt turn on. Also, the wifi led is no longer on..? I thought it should be always on/blinking?
Any help is greatly appreciated

 

[OldReefGuy]

hold the "set" button, tap set button again to run through each setting and list them here..

Current Setting as below:
DEFAULT SCREEN: 80.3 / 78.0
HD:3
CD:3
AH:81
AL:70
PT:0
CA:0
CF:F
TS:78

 

[Dooly]

Change HD to 2 and CD to 1 and the fans should kick on at 79 until 78

 

[OldReefGuy]

Noted and will update. Thanks.

 

[Dooly]

Noted and will update. Thanks.

Did it work? From what I remember, HD is how many degrees under the set temperature it will go before heating kicks on and CD was how many degrees warmer before cooling kicks on and you had it set to 81 degrees since your set was 78

 

[weelo111]

Since you have your TS (temperature set) to 78. I would do the following. I would set the HD (heating differential) to 1, so that the heater will kick on at 77. You have it currently set to 3 which is programmed to have the heater switch on at 75.

For you fan - you currently have you CD (cooling differential) at 3 which kicks on your fan when it reaches 81. If you want your fan to switch on at 80 - you have to set your CD to 2

For you AL (alarm low) you currently have it set for 70 to alert you if the temp is low. I would set that at 75 or 76.

Hope this helps.

 

[OldReefGuy]

"For you fan - you currently have you CD (cooling differential) at 3 which kicks on your fan when it reaches 81. If you want your fan to switch on at 80 - you have to set your CD to 2 ".....aha....that might explain it....OK will try all tonight when I get home.....

 

[OldReefGuy]

Did it work? From what I remember, HD is how many degrees under the set temperature it will go before heating kicks on and CD was how many degrees warmer before cooling kicks on and you had it set to 81 degrees since your set was 78

Will try later on tonight when I get home.....Thanks!

 

[OldReefGuy]

Thanks for all the help.
Changes made, I will see whats up when I get home tonight....

 

[OldReefGuy]

Thank you for all the help. Inkbird now fixed and comes on and turns off at desired settings.

 

[drexel]

Glad it's working. I tried an Inkbird a few years ago and sent it back. It was all over the place and wouldn't hold steady temp for me. I bought the Elitech STC-1000 for $15 and wired it myself. It's been working perfectly and I love the 2 stage as well. Cooling works well.
For those who don't want to fuss with the Inkbird and don't mine DIY, here's the link.
https://www.elitechus.com/products/...ture-controller-incubator-aquarium-cold-chain