- Joined
- Jan 25, 2009
- Messages
- 569
- Likes
- 3
- Points
- 0
Here are some pics of the most recent kalkreactor I made for one of my customers.
The unit is about 24"tall with 6" tubing as main body
I used scrap acrylic for end pieces and all fittings were from OSH and Lowes
The acrylic main tube was found on ebay as scrap(end was damaged and removed)
total cost was under $50 without pump
Using a spare Maxi jet pump for now, will probably upgrade to eheim as budget allows.
The pump is on a basic timer and mixes twice a day.
The KR is running between RO reservoir and Sump/ ATO float
The unit is about 24"tall with 6" tubing as main body
I used scrap acrylic for end pieces and all fittings were from OSH and Lowes
The acrylic main tube was found on ebay as scrap(end was damaged and removed)
total cost was under $50 without pump
Using a spare Maxi jet pump for now, will probably upgrade to eheim as budget allows.
The pump is on a basic timer and mixes twice a day.
The KR is running between RO reservoir and Sump/ ATO float
Attachments
-
89.2 KB Views: 35
-
91.6 KB Views: 22
-
91 KB Views: 16
-
91 KB Views: 17
-
87.3 KB Views: 26