Marine Sources or ReefStar DSP-1 doser instructions
- Thread starter sd45x
- Start date
It's not, there's no "clock" in this one. I've figured out how to select heads and manually prime the heads (similar to the BM).
The display on this one is (underscore represent empty spot):
XX XX XX
__ XX XX
As an example I think it's:
Head ML X per/day
01 05 10 (head 1, dose 5ml, 10 times a day)
__ 02 08 (2ml left in current dose, 8 doses left for the day)
There is also an "ad" and a "cr" that displays in the lower-left empty spot while programming, not sure what those mean. This is a little frustrating but I got the 3 head unit and 4 head slave for $60 as-is off CL, all the heads work. These are also different than the BM in that they use an RJ45 network cable.
Hoping this may help someone in the future.
The display on this one is (underscore represent empty spot):
XX XX XX
__ XX XX
As an example I think it's:
Head ML X per/day
01 05 10 (head 1, dose 5ml, 10 times a day)
__ 02 08 (2ml left in current dose, 8 doses left for the day)
There is also an "ad" and a "cr" that displays in the lower-left empty spot while programming, not sure what those mean. This is a little frustrating but I got the 3 head unit and 4 head slave for $60 as-is off CL, all the heads work. These are also different than the BM in that they use an RJ45 network cable.
Hoping this may help someone in the future.
I'm going to figure this thing out [language filter], hope someone finds this useful.
I think "ad" means add/update selected head and "cr" means clear selected head. Also since there are no clock or time settings on this unit each head is offset by 5 minutes. So head 1 runs, 5 minutes later head 2, 5 minutes later head 3, etc if they all had the same programming.
If the last column in row 1 is "99" the selected head should run every 14.5 minutes
I think "ad" means add/update selected head and "cr" means clear selected head. Also since there are no clock or time settings on this unit each head is offset by 5 minutes. So head 1 runs, 5 minutes later head 2, 5 minutes later head 3, etc if they all had the same programming.
If the last column in row 1 is "99" the selected head should run every 14.5 minutes
If anyone else ever owns one and can't figure it out, I finally found the info I was looking for. The second column is seconds/milliliters for each dose, the 3rd column is hours between doses. So the top number is the setting in hours, and the bottom number is the hours till the next dose. If you want 4 doses a day, set it to "6".
From: https://www.myaquastore.com/ru/titr...-dsp-1-three-channel-titration-pump-host.html
Working mode: interval cycles after dropping, dropping a single set flow rate and intervals, the product will be in accordance with the intervals set number of hours of intermittent dripping. Single drops flow 00-99ml adjustable, adjustable time interval 00-99 hours, and the other with automatic anti-interference mode, the same time there are two or more head needs dropping, the pump head is automatically converted to the anti-interference mode, the pump head will be different queuing drip drip after the previous head, a head after waiting two minutes after drip, drip while avoiding different elements may produce a variety of physical or chemical reactions and interference .
From: https://www.myaquastore.com/ru/titr...-dsp-1-three-channel-titration-pump-host.html
Working mode: interval cycles after dropping, dropping a single set flow rate and intervals, the product will be in accordance with the intervals set number of hours of intermittent dripping. Single drops flow 00-99ml adjustable, adjustable time interval 00-99 hours, and the other with automatic anti-interference mode, the same time there are two or more head needs dropping, the pump head is automatically converted to the anti-interference mode, the pump head will be different queuing drip drip after the previous head, a head after waiting two minutes after drip, drip while avoiding different elements may produce a variety of physical or chemical reactions and interference .
