need help drilling 40 breeder 92240

[Reefcube29]

Anyone local or willing to come help me out. I am so lost and don't even know where to begin. Just got my cast off so time to get this tank of my floor and get the stand built as well. I only need help with the drilling as it scares me to even think about trying by myself. Any help or options are greatly appreciated.

 

[Lexusman25]

I would take it to coral gazers haha Chad is the master of all things tank and DIY!

 

[Reefcube29]

I would take it to coral gazers haha Chad is the master of all things tank and DIY!

That's a straight up mission, I live next to Palm Springs.

 

[xmas_one]

It's easy man. Just watch a couple of youtubes and take your time.

 

[newtothis]

Make yourself a template with some wood; clamp it down; pour some water; tape the other side where your drilling; and drill away. Done and done. Have fun.

 

[planbtypea]

Make yourself a template with some wood; clamp it down; pour some water; tape the other side where your drilling; and drill away. Done and done. Have fun.

+1

And take your time, don't rush it. I just drilled my 125 a week ago.

 

[Reefcube29]

Anyone willing to donate some time for an 12 or 18 pack, if you bring the bit and help me out...

 

[newtothis]

Anyone willing to donate some time for an 12 or 18 pack, if you bring the bit and help me out...

If you bring it Anaheim tomorrow, I'll drill it for you..

 

[Reefcube29]

If you bring it Anaheim tomorrow, I'll drill it for you..

That's awesome, I have my son normally from Thursday to Mondays. Let me see if I can find anyone closer and if not I'll try to set something up one day here soon.

 

[BigDaddyStar]

I can drill it for ya..but my bits are pretty much shot I think. I would order them from ebay. Just bUy the bits need you and bring it by..I am probably the closest you'll get. But like those have said it's pretty easy. You do need a good drill though.