South OC Chloramine PSA

Joined
Aug 19, 2007
Messages
262
Likes
62
Points
18
#1
Not sure how many others are on San Margarita Water district but I just got off the phone with them after a positive test on my source water and they told me they use chloramines and that chloramine levels in the water will likely be higher for the next few mo.

Thought I'd pass it along in case it's not common knowledge.

Sent from my Pixel 3a XL using Tapatalk
 
Joined
Aug 19, 2007
Messages
262
Likes
62
Points
18
#3
Uhh ohh. My Di resin already goes so fast here.. what’s the best way for us to combat it?
Guys on the other board are saying to add a chloramine specific carbon block as one of the stages upstream of the RO membrane. Comes up easy on Amazon prime.



You can add prime to the water that comes out to make it useable.

Sent from my Pixel 3a XL using Tapatalk
 

JustAnotherNanoTank

Aka Tyler Aka BlueRiverReefs on Instagram!
Joined
Mar 6, 2020
Messages
354
Likes
123
Points
28
#4
Well part of me is thinking I may have that black standard in my Melev’s Reef system. But now I think I need to just get new ones to be for sure. That’s a good heads up. If I have the wrong ones then the BioCube sure as heck isn’t showing signs because my acros are just exploding in growth right now!
 
Joined
May 18, 2018
Messages
170
Likes
42
Points
28
Location
dana point
#5
im using prime now and corals are looking much better. my water almost has a chlorine smell after coming out of the rodi
 

JustAnotherNanoTank

Aka Tyler Aka BlueRiverReefs on Instagram!
Joined
Mar 6, 2020
Messages
354
Likes
123
Points
28
#6
What’s your guys TDS from Tap? Mine is around 470ish last I checked. I get down to 9TDS after RO. I need to do an icp test soon. Like I said, I think my system came with a universal carbon block.
 

joseserrano

Member
2020 Contributor
Joined
Nov 6, 2013
Messages
5,555
Likes
1,861
Points
83
Location
Santa Ana/Tustin
#16
The big issue here is not it really getting into your rodi. Chloramine converts to ammonia in tank water, which shouldn’t be super impactful to most tanks. The issue is that chloramines will burn through your di faster.
 

JustAnotherNanoTank

Aka Tyler Aka BlueRiverReefs on Instagram!
Joined
Mar 6, 2020
Messages
354
Likes
123
Points
28
#17
The big issue here is not it really getting into your rodi. Chloramine converts to ammonia in tank water, which shouldn’t be super impactful to most tanks. The issue is that chloramines will burn through your di faster.
That’s the part that f ing sucks.
 

five.five-six

Member
2020 Philanthropist
Joined
Mar 6, 2008
Messages
2,268
Likes
1,260
Points
83
Location
Corona Ca
#18
Uhh ohh. My Di resin already goes so fast here.. what’s the best way for us to combat it?

Yes, if the chloramines get to your RO membrane, that’s bad. Chloramines eat RO membranes. Best practices is to get a chloramines specific carbon block stage ASAP.

IMO, everyone should run a chloramines buster because you never know when your water district might just start adding them.
 

djrice69

SocaliReef M0DERAT0R IG Farmedfrags
Staff member
2020 Philanthropist
Supporter
Joined
Aug 21, 2007
Messages
2,372
Likes
676
Points
83
Location
OC
#19
That would explain y some of my sps stn recently and after I changed out my silica buster Di it slowed the stn event
 

JustAnotherNanoTank

Aka Tyler Aka BlueRiverReefs on Instagram!
Joined
Mar 6, 2020
Messages
354
Likes
123
Points
28
#20
Yes, if the chloramines get to your RO membrane, that’s bad. Chloramines eat RO membranes. Best practices is to get a chloramines specific carbon block stage ASAP.

IMO, everyone should run a chloramines buster because you never know when your water district might just start adding them.
That’s good stuff there. I think I’ll get a new one just to be positive. Thanks.
 

Latest posts

Top