Super Glue Gel?

dahouck

New member
Joined
Feb 26, 2008
Messages
23
Likes
0
Points
0
Location
Moreno Valley
#1
To attach coral (on LR or plug) to LR in the tank do you just put some of this right onto the piece and put it directly (wet) into the tank?

Thanks
 

LBFish

New member
Joined
Dec 28, 2009
Messages
34
Likes
0
Points
0
Location
LB
#2
The stuff I got you just put some on the frag and then directly onto the LR in the tank. But, I got some marine glue gel from my LFS, I don't know if you have the same or standard super glue.
 
Joined
Sep 19, 2007
Messages
474
Likes
53
Points
18
Location
Rancho Cucamonga
#3
You use any Super Glue Gel. Get the Gel type. Home Depot or Lowes sells them for $2-$3 for two small tubes. My 99 cents stores carries brand of super glue gel that Lowes carries for 99 cents for two small tubes.
 

lowbudget

Premium Member
Supporter
Joined
Nov 26, 2007
Messages
22,203
Likes
88
Points
48
Location
los angeles
#13
i use the on from micheals craft store. its cheap and there is a lot in there. i dry off both suface and then put them together and leave it like that for 10 sec, then dip in water so it cure faster
 

mudnut

New member
Joined
Sep 8, 2009
Messages
76
Likes
0
Points
0
#19
For smaller frags I use super glue gel, for larger plugs and frags, I use underwater epoxy. The epoxy is trickier to use, I found that it works best if you apply pressure and twist the frag, then hold it there for 15-30 seconds. Otherwise, it wouldn't stick. But once it cures, it's very solid.
 
Top