Closed - 120 w LED fixture
BUY IS CLOSED
I will be taking orders between now and 9 Nov. I plan to receive shipment no later than than 30 Nov. This is a good time to make your holiday requests.
Please post inquiries to me via PM so I do not miss it.
I have done some research on purchasing LED Fixtures for reef tanks. I have found a fixture that exceeded the output of other fixtures being offered and meets my requirements. I am offering a purchase for anyone interested in upgrading to or buying a LED fixture.
Some fixtures sold in the local marked have been found to be missing a critical part to the performance of the fixture namely Heatsinks. The fixtures of this purchase HAVE integrated heatsinks that cover the entire LED bulb assembly. Heatsinks are a must in a led fixture to keep heat from the LED bulbs. Heat is the primary cause of failure in an LED. Also there are vents on all four sides (many I have seen only have vents on two sides) which improves air flow over the heatsinks.
The 120W fixture purchased in the last buy is 16" long x 8.5" wide and 3.0" high. The LED panel window is 12" x 4.75".
This is how I mounted fixtures over my 60 x 30 x 24 180 inwall. I used Light lifters (avail for $19 comes with a pair of lifters that hold 22lbs. 120 fixture is 10 lbs)
One thing I like about this manufaturer is they are willing to offer white lights from 4500K to 20000K and Blues from 440-470nm.
There are other spectrums available :red620nm-660nm;orange610-615nm;yellow:585-595nm;green500-530nm;UV380-440nm;IR730-850nm most of which do not concern saltwater aquarium usage.
My choice was to go with 14000k and 453nm. 16000k will give a slightly whiter look
Also they offered options of ratio mixes and I chose as close to a 1:1 as possible. 63 whites and 56 blues arranged as in picture.
There is a timer option available for $25 extra... the timer is pretty good as you can set on off times in eight different modes:
you could have all come on at the same time and off at the same time
you could have blues come on earlier and turn off later than whites.
you can have different times on different days of the week
PAR READINGS??? After my sample unit arrived I set it up over my tank and took some readings... I am Very impressed as th PAR reading are much Higher that some other 120w fixtures that are out there. And the spread was very good as you san see in my readings. I did measurements with White only, Blue only, and then with both. I also did a spread reading to the sides with both colors on at 6", 9", 12", 15", 18" and 20" in water. The lamp assembly is two inches above the water. Compare the following ( as measured by laffingcrow in another thread) to MH 250W @ 11" depth= 150 PAR @ sand bed 20"depth = 100 PAR ;T5s 2-wt/2bl 11" = 100 PAR @ sand bed 20" depth 50 PAR
The manufacturers seller has continued the discount price from the last purchase for the described unit (120W 63-14000k (or 16000K) whites and 56-453nm blues arranged as in picture) and they are currently available for $245 (Shipping included). This is a corded model without a timer.
A Timer option is $25 additional per unit.
Standard case comes in white and black cases are $10 extra per unit.
The company manufactures lamps in 90w,120w(like this one),180w,200w, 300w and 600W for your selection.
120W (119 - 1w LEDs) 16" x 8.5" x3" $245
More PAR for deeper applications (same as 120w fixture)
160W (119 - 2W LEDs) 120w size $340
160W (119 - 3W LEDs) 120w size $370
180W (119 - 3W LEDs) 120w size $390
Larger spread with larger fixture
160w (160 - 1w LEDs) 19" x 12.5" x 3.7" $430 The manufacture noted the brilliance on this model is a little lower due to wider spacing.
180w (180 - 1w LEDs) 19" x 12.5" x 3.7" $460
300w (288 - 1w LEDs) 19" x 12.5" x 3.7" $550
Big application with Large fixture
600w (576-1w LEDs) 36" x 12.5" x 3.7" $990
WARRANTY: All fixtures are warranteed for three years. The manufacturer has authorized me to verify defects and even make repairs on replacable components. If repairs exceed local capability the manufacturer will cover shipping the component for the first two years. The third year the customer can ship the unit to the manufaturer and all repair costs will be free.
When you send request in pm and I confirm cost of order, I will send a paypal invoice (unless you are paying cash).
BUY IS CLOSED
BUY IS CLOSED
I will be taking orders between now and 9 Nov. I plan to receive shipment no later than than 30 Nov. This is a good time to make your holiday requests.
Please post inquiries to me via PM so I do not miss it.
I have done some research on purchasing LED Fixtures for reef tanks. I have found a fixture that exceeded the output of other fixtures being offered and meets my requirements. I am offering a purchase for anyone interested in upgrading to or buying a LED fixture.
Some fixtures sold in the local marked have been found to be missing a critical part to the performance of the fixture namely Heatsinks. The fixtures of this purchase HAVE integrated heatsinks that cover the entire LED bulb assembly. Heatsinks are a must in a led fixture to keep heat from the LED bulbs. Heat is the primary cause of failure in an LED. Also there are vents on all four sides (many I have seen only have vents on two sides) which improves air flow over the heatsinks.
The 120W fixture purchased in the last buy is 16" long x 8.5" wide and 3.0" high. The LED panel window is 12" x 4.75".
This is how I mounted fixtures over my 60 x 30 x 24 180 inwall. I used Light lifters (avail for $19 comes with a pair of lifters that hold 22lbs. 120 fixture is 10 lbs)
One thing I like about this manufaturer is they are willing to offer white lights from 4500K to 20000K and Blues from 440-470nm.
There are other spectrums available :red620nm-660nm;orange610-615nm;yellow:585-595nm;green500-530nm;UV380-440nm;IR730-850nm most of which do not concern saltwater aquarium usage.
My choice was to go with 14000k and 453nm. 16000k will give a slightly whiter look
Also they offered options of ratio mixes and I chose as close to a 1:1 as possible. 63 whites and 56 blues arranged as in picture.
There is a timer option available for $25 extra... the timer is pretty good as you can set on off times in eight different modes:
you could have all come on at the same time and off at the same time
you could have blues come on earlier and turn off later than whites.
you can have different times on different days of the week
PAR READINGS??? After my sample unit arrived I set it up over my tank and took some readings... I am Very impressed as th PAR reading are much Higher that some other 120w fixtures that are out there. And the spread was very good as you san see in my readings. I did measurements with White only, Blue only, and then with both. I also did a spread reading to the sides with both colors on at 6", 9", 12", 15", 18" and 20" in water. The lamp assembly is two inches above the water. Compare the following ( as measured by laffingcrow in another thread) to MH 250W @ 11" depth= 150 PAR @ sand bed 20"depth = 100 PAR ;T5s 2-wt/2bl 11" = 100 PAR @ sand bed 20" depth 50 PAR
The manufacturers seller has continued the discount price from the last purchase for the described unit (120W 63-14000k (or 16000K) whites and 56-453nm blues arranged as in picture) and they are currently available for $245 (Shipping included). This is a corded model without a timer.
A Timer option is $25 additional per unit.
Standard case comes in white and black cases are $10 extra per unit.
The company manufactures lamps in 90w,120w(like this one),180w,200w, 300w and 600W for your selection.
120W (119 - 1w LEDs) 16" x 8.5" x3" $245
More PAR for deeper applications (same as 120w fixture)
160W (119 - 2W LEDs) 120w size $340
160W (119 - 3W LEDs) 120w size $370
180W (119 - 3W LEDs) 120w size $390
Larger spread with larger fixture
160w (160 - 1w LEDs) 19" x 12.5" x 3.7" $430 The manufacture noted the brilliance on this model is a little lower due to wider spacing.
180w (180 - 1w LEDs) 19" x 12.5" x 3.7" $460
300w (288 - 1w LEDs) 19" x 12.5" x 3.7" $550
Big application with Large fixture
600w (576-1w LEDs) 36" x 12.5" x 3.7" $990
WARRANTY: All fixtures are warranteed for three years. The manufacturer has authorized me to verify defects and even make repairs on replacable components. If repairs exceed local capability the manufacturer will cover shipping the component for the first two years. The third year the customer can ship the unit to the manufaturer and all repair costs will be free.
When you send request in pm and I confirm cost of order, I will send a paypal invoice (unless you are paying cash).
BUY IS CLOSED
Last edited:
