Everything needed for a successful QT system. Tons of copper included as well. Everything a few months old. All my fish are healthy, not adding anymore and need the space.
40 aqueoun breeder
Large Peguin bio wheel. Both filters are intact and a spare is included along with new carbon filter pad.
ATO- no name but I've had it for years and without failure. Comes with aqua lifter pump and 5 g jug
Tunze 6015? The smaller one
Glass thermometer
Fluval led 36-48"
Seaside aquatics HOB skimmer - I'd throw this on during the observation period before and after copper
10" syphon with prime bulb
Nano mag float
Fish net
Suction cup feeder
Air pump and stone
I also have plenty of nylon net you can have for a diy top
EVERYTHING HAS BEEN IN CONTACT WITH COPPER DURING TREATMENT*
I was very successful with this setup. Asking $140
Everything + a Reef keeper lite for $170. I didnt use the reef keeper lite. I got frustrated with their program and could figure out how to erase the old settings. Comes with temp probe.
I also have a budget QT I used for prazipro treatments after copper:
Acrylic approx 30g and fairly clean but does have scratches.
Comes with 2 aquaclear filters. 1 impeller does stick from time to time, usually after being off for a water change.
Hydor 700 gph pump
150w heater and some live rock.
Air pump and stone
$50
I did not run copper in this one but I bought it used so who knows.
I'll toss in all my copper power and cupramine I have with the 40g setup. I also have an app copper test kit and cup ramine test kit. A good amount of prazipro included as well.
Pictures to fallow. My phone has lost this post twice so I'll add the pics separate.
Will hold with PP for pickup soon. Really want this out.
More to come as I go through things in the garage. Some freebies and cheap.
40 aqueoun breeder
Large Peguin bio wheel. Both filters are intact and a spare is included along with new carbon filter pad.
ATO- no name but I've had it for years and without failure. Comes with aqua lifter pump and 5 g jug
Tunze 6015? The smaller one
Glass thermometer
Fluval led 36-48"
Seaside aquatics HOB skimmer - I'd throw this on during the observation period before and after copper
10" syphon with prime bulb
Nano mag float
Fish net
Suction cup feeder
Air pump and stone
I also have plenty of nylon net you can have for a diy top
EVERYTHING HAS BEEN IN CONTACT WITH COPPER DURING TREATMENT*
I was very successful with this setup. Asking $140
Everything + a Reef keeper lite for $170. I didnt use the reef keeper lite. I got frustrated with their program and could figure out how to erase the old settings. Comes with temp probe.
I also have a budget QT I used for prazipro treatments after copper:
Acrylic approx 30g and fairly clean but does have scratches.
Comes with 2 aquaclear filters. 1 impeller does stick from time to time, usually after being off for a water change.
Hydor 700 gph pump
150w heater and some live rock.
Air pump and stone
$50
I did not run copper in this one but I bought it used so who knows.
I'll toss in all my copper power and cupramine I have with the 40g setup. I also have an app copper test kit and cup ramine test kit. A good amount of prazipro included as well.
Pictures to fallow. My phone has lost this post twice so I'll add the pics separate.
Will hold with PP for pickup soon. Really want this out.
More to come as I go through things in the garage. Some freebies and cheap.