DIY question for 0-10v port
Ok so I’d like to know if one port can control 2 meanwell divers?
So I’m planning on running my 0-10v ports like this
-base_Var1 for blue LEDs
-base_Var2 for white LEDs
-base_Var3 for forward gyre
-base_Var4 for reverse gyre
I have 3 drivers for the LEDs one driver for royal blue LEDs, another driver for blue LEDs, and the last is for white LEDs.
Can I hookup two drivers to port -base_Var1?
And If so will the 0-10v port be able to run the two drivers at a 100%?
I’m trying to have dimming capability of the 180watts of LEDs I have been running along the side of my 3 radions xr30s. I bought the drivers that have 0-10v dimming and have already wired up the drives and know they work. I just want to make sure I won’t mess up the apex var port before hooking plug into apex brain.
Ok so I’d like to know if one port can control 2 meanwell divers?
So I’m planning on running my 0-10v ports like this
-base_Var1 for blue LEDs
-base_Var2 for white LEDs
-base_Var3 for forward gyre
-base_Var4 for reverse gyre
I have 3 drivers for the LEDs one driver for royal blue LEDs, another driver for blue LEDs, and the last is for white LEDs.
Can I hookup two drivers to port -base_Var1?
And If so will the 0-10v port be able to run the two drivers at a 100%?
I’m trying to have dimming capability of the 180watts of LEDs I have been running along the side of my 3 radions xr30s. I bought the drivers that have 0-10v dimming and have already wired up the drives and know they work. I just want to make sure I won’t mess up the apex var port before hooking plug into apex brain.