I FINALLY got my BRA Nova flare LED fixture last week and will be selling my DIY LED project I was working on. This fixture is 48" long on a 4 rail track. nailed it to some wood but you can do whatever you want with it. I'll even throw in 2 heat sinks so you can split it up into 2 really nice fixtures.
I'm not the smartest DIY LED guy so my soldering is sloppy, will need to be redone as some of the lights aren't on(powered). If I mess with the lights they turn on so yeah. Also 1 LED is burnt out and you'd need to remove it in order for the circuit to be complete. So it will be a little project but for this ridiculously low price, well worth it.
7 MEANWELL drivers. all dimmable. 7 dimmer switches. (2 aren't hooked up, MIGHT be burnt out.... not sure, so we'll call those free.)
Model: MW-S0361203A
AC INPUT 100-240V 50/60Hz
DC OUTPUT: 24-51V
60ish 3W LEDs. around 14 whites, like 2 reds, and the rest blues.
60ish 60 degree optical lenses.
2 1W 6 LED moon lights.
2 heat sinks sound 14" by 10"
4 48" rails.
1 spool of wire.
some extra solder wire.
$100. and each driver and each heat sink being $20 alone, this project will well worth it. you have all the tools just a little time and fun to learn this stuff anyways.
First 2 pictures are of only half the lights on as I stated some aren't working at the moment.
I'm not the smartest DIY LED guy so my soldering is sloppy, will need to be redone as some of the lights aren't on(powered). If I mess with the lights they turn on so yeah. Also 1 LED is burnt out and you'd need to remove it in order for the circuit to be complete. So it will be a little project but for this ridiculously low price, well worth it.
7 MEANWELL drivers. all dimmable. 7 dimmer switches. (2 aren't hooked up, MIGHT be burnt out.... not sure, so we'll call those free.)
Model: MW-S0361203A
AC INPUT 100-240V 50/60Hz
DC OUTPUT: 24-51V
60ish 3W LEDs. around 14 whites, like 2 reds, and the rest blues.
60ish 60 degree optical lenses.
2 1W 6 LED moon lights.
2 heat sinks sound 14" by 10"
4 48" rails.
1 spool of wire.
some extra solder wire.
$100. and each driver and each heat sink being $20 alone, this project will well worth it. you have all the tools just a little time and fun to learn this stuff anyways.
First 2 pictures are of only half the lights on as I stated some aren't working at the moment.
