Acrylic aquarium repair

[dontavo27]

What’s up reefers. I woke up to a leaking aquarium this morning, luckily it was only a couple of gallons
Worth. The leak seams to be coming from my tanks Over flow, at the bottom corner.
It’s an Acrylic Aquarium, and I was wondering if anyone knew of An acrylic repair solution that would hopefully make this a quick repair.

would this be something worth a try?
https://www.amazon.com/Adhesive-Rep...2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

 

[dontavo27]

Here’s what’s I’m working with.

 

[CHASDB]

I think I would use IPS Weld On 16. Find a local acrylic shop and see if you can get some scrap acrylic, 1/4 or 3/8 thick by 1/2 wide and then cut and glue strips around all 3 sides (outside) of your overflow box to seal and reinforce it. Use masking tape to hold it while it cures.