OG’s next build

[OGFrenchHorn]

Soon, it'll be two more full length frag tanks connect to a giant pond sump...

I was thinking about putting in a pond on the other side of that wall. Maybe it’s be a saltwater lagoon


Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

Haven’t done a water change since I started the tank and the skimmer has been off for a month. Looks like I have to dose nitrate.

The refugium is definitely putting in work

Sent from my iPhone using Tapatalk Pro

 

[bakbay]

Soon, it'll be two more full length frag tanks connect to a giant pond sump...

I think what would be very cool to have “two more full length frag tanks connect to a giant pond”

 

[bakbay]

I think that PO4 is more important than nitrate. Even if NO3 is “zero”, our hobby grade tester may not be accurate? Are you going to harvest half the chaeto or dose ammonium chloride?

 

[OGFrenchHorn]

I think that PO4 is more important than nitrate. Even if NO3 is “zero”, our hobby grade tester may not be accurate? Are you going to harvest half the chaeto or dose ammonium chloride?

I’ll probably do both. The chaeto is out competing the dragons breath right now. I’ll probably get a hamster ball for the chaeto.


Sent from my iPhone using Tapatalk Pro

 

[bakbay]

This looks good. Do you happen to have the build of material for me to copy?

Thanks

 

[OGFrenchHorn]

This looks good. Do you happen to have the build of material for me to copy?

Thanks

It’s just 1.5 inch T slot with an inside bracket. There’s a 1.5 L bracket with 2 holes on each side of the T slot


Sent from my iPhone using Tapatalk Pro

 

[Jimbo327]

I see you have an Ozone dryer mounted on your control board. Doesn't that get really hot?

 

[drexel]

I would just dose ammonium bicarbonate instead of sodium nitrate, it goes directly to the things that want/need it. Looking good.

 

[OGFrenchHorn]

I see you have an Ozone dryer mounted on your control board. Doesn't that get really hot?

It does but not super hot. I had it mounted on plywood last time I used it. It’s a dual chamber so it’s not always on.


Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

I would just dose ammonium bicarbonate instead of sodium nitrate, it goes directly to the things that want/need it. Looking good.

Good idea. I’ll do that.


Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

Someone was very hungry this morning. Loving that OG Phyto

Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

I’m up to 6 CSBs now. They keep splitting! There is one that’s way in a crevice that might be 2 but I’m counting it as one right now. One split off and was on the glass this morning so I threw it in a hamster ball and it’ll make its way to its new home tomorrow, hopefully.

I’ve been dosing ammonia and other nutrients to the tank and it’s still ULNS. Phosphate actually dropped from last week! I ended up taking out a full bucket of cheato to see if I can get those up.

Sent from my iPhone using Tapatalk Pro

 

[Jimbo327]

Your new sand and rock is a huge sink for nutrients until it gets filled.

 

[OGFrenchHorn]

Your new sand and rock is a huge sink for nutrients until it gets filled.

It might also be the 3 bacterial blooms I did at the beginning


Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

Upgraded my CARX. I’ve had issues with it since I bought it. I think the put too big a pump and it was over heating the reactor. It’s been in storage the past 4 years and finally decided to upgrade it. The upgrade comes with a co2 chamber and a DC pump. If this doesn’t solve the issue I’m going to loose it lol.

Before:

After:

Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

Week after removing cheato and dosing ammonia

Sent from my iPhone using Tapatalk Pro

 

[OGFrenchHorn]

Some shots from today

Sent from my iPhone using Tapatalk Pro