WTB 1/2" hole saw located in Garden Grove 92844

[pikachux3]

Anyone happen to have a 1/2" hole saw I can buy/borrow? Let me know, thanks!

 

[trunglippo]

Drew bit you mean?

 

[ngvu1]

What type? Wood, metal, concrete, granite or glass?

 

[pikachux3]

Drew bit you mean?

Yea it has a bit in it. Looks like this

What type? Wood, metal, concrete, granite or glass?

For a plastic bucket.

 

[ngvu1]

How thick is the material are you drilling? For a thin layer, any 1/2 inch drill bit will work.....

 

[cowboycove]

I have a kit. Not really near you. But gonto harbor freight. It's 10$ for something like 1/4" all the way to 5". I use it to cut wood and acrylic. I even used it to drill through my stucco. Worked fine but had to toss it out after 1 use. Make a guide before drilling acrylic so you don't leave swirls from sliding.

 

[pikachux3]

How thick is the material are you drilling? For a thin layer, any 1/2 inch drill bit will work.....

It is thin I suppose. I'm trying to put a uniseal in. Drilling with a 1/2 inch drill bit leaves rough plastic bits around the hole inside the bucket. Not sure how it would affect the uniseal.

I have a kit. Not really near you. But gonto harbor freight. It's 10$ for something like 1/4" all the way to 5". I use it to cut wood and acrylic. I even used it to drill through my stucco. Worked fine but had to toss it out after 1 use. Make a guide before drilling acrylic so you don't leave swirls from sliding.

Lowest hole saw size I saw was 3/4" >.<.

 

[xmas_one]

Try a 1/2" spade bit. Should be cheap at Lowes/HD.

 

[cowboycove]

Try a 1/2" spade bit. Should be cheap at Lowes/HD.

Was just About to recommend that. Home depot has a ryobi kit that has those in there for $10. Or buy a single. That sh!t eats through wood so fast. If you already have a 1/2 " drill bit just clean up the shreds after with a Razer blade.

 

[MadMax]

I have what you need (to borrow) here in Garden Grove at Beach and Trask

call me

kevin (714) 530-1094