due to time restraints and family issue im looking to sell my frag tank setup that i just put together about 3 months ago...
i dont have time for two systems with my work schedule and some recent medical matters with my father .. since ill be taking on some of his work as well as my normal work scedule im looking to sell this as a setup..
NOT LOOKING TO PARTING OUT..... ALL OR NOTHING...SO JUST DONT ASK, DONT HAVE THE TIME
this is a perfect setup for some one that wants to plumb in a frag setup to their existing system... i have this setup so that all you have to do is plumb in the 2" inlet from the snapper and extend the drain lines depending on how your sump is setup..
this setup includes :
2 - 20L gal breeder tanks (30" x 12 1/2" x 12 1/2") each is drilled with a 3/4" return and a 1" drain which i have setup as a 1 -1/2" drain..
1 - 48"L x 36"W x 17" T glass frag tank.. tank has 1" glass bracing around the edge.. tank is drilled with 2 - 1 1/2" drains and has 1 - 1" return / overflow hole drilled in the back right corner.. i have the tank setup so that the back side of it has a removable black acrlyic sheet, instead of paiting the back of it, so you can see thru the tank, tank has 3 over the back returns since
1 - reeflo snapper retrun pump
1 - stand built like a tank
ALL PLUMBING NEEDED TO GET WATER FLOWING THRU THIS BEAST
system is setup with a snapper feeding all 3 tanks.. each 20L has a 1" retrun with ball valve and the frag tank has 3 - 1" returns.. under the stand where all the ball valves are located is also a manifold.. it has 3 - 1" ball valves.. one set up for a cal rx feed, one for a uv sterilizer , and one extra.
overall tank / stand dimensions are 60" L x 65" T x 37" W
everything is cleaned and ready to go as of now..
750.oo firm....
if it doesnt sell ill just put it in storage and hold onto it
heres a pic, not the best but you get a feel for it
wont be on the boards as often as usual so email is best
tangreefkeeper@yahoo
ONLY WHAT I HAVE LISTED IS INCLUDED
i dont have time for two systems with my work schedule and some recent medical matters with my father .. since ill be taking on some of his work as well as my normal work scedule im looking to sell this as a setup..
NOT LOOKING TO PARTING OUT..... ALL OR NOTHING...SO JUST DONT ASK, DONT HAVE THE TIME
this is a perfect setup for some one that wants to plumb in a frag setup to their existing system... i have this setup so that all you have to do is plumb in the 2" inlet from the snapper and extend the drain lines depending on how your sump is setup..
this setup includes :
2 - 20L gal breeder tanks (30" x 12 1/2" x 12 1/2") each is drilled with a 3/4" return and a 1" drain which i have setup as a 1 -1/2" drain..
1 - 48"L x 36"W x 17" T glass frag tank.. tank has 1" glass bracing around the edge.. tank is drilled with 2 - 1 1/2" drains and has 1 - 1" return / overflow hole drilled in the back right corner.. i have the tank setup so that the back side of it has a removable black acrlyic sheet, instead of paiting the back of it, so you can see thru the tank, tank has 3 over the back returns since
1 - reeflo snapper retrun pump
1 - stand built like a tank
ALL PLUMBING NEEDED TO GET WATER FLOWING THRU THIS BEAST
system is setup with a snapper feeding all 3 tanks.. each 20L has a 1" retrun with ball valve and the frag tank has 3 - 1" returns.. under the stand where all the ball valves are located is also a manifold.. it has 3 - 1" ball valves.. one set up for a cal rx feed, one for a uv sterilizer , and one extra.
overall tank / stand dimensions are 60" L x 65" T x 37" W
everything is cleaned and ready to go as of now..
750.oo firm....
if it doesnt sell ill just put it in storage and hold onto it
heres a pic, not the best but you get a feel for it
wont be on the boards as often as usual so email is best
tangreefkeeper@yahoo
ONLY WHAT I HAVE LISTED IS INCLUDED
